Suitable For:
Universal - glues wood, wood based materials, plastics (ABS, hard and soft PVC, Plexiglas, polystyrene, Resopal), metal, glass, porcelain, ceramic, leather, rubber, felt, cork, fabrics, cardboard, paper, many plastics and much more.
Not Suitable For:
Not suitable for Styrofoam, Polyethylene (PE) and Polypropylene (PP).
Before Use:
Working conditions: Do not use at temperatures below +5 °C.
Surface requirements: Materials to be glued must be clean, dry and free of dust and grease.
Preliminary surface treatment: When glueing plastics or metal, better results can be obtained if the parts to be stuck together are slightly roughened first.
During Use:
Directions for use: Apply the adhesive thinly to one side of the assembly, press the parts together - that's it! For non-absorbent materials (e.g. ceramic, coated papers), apply to both sides of the assembly, leave to dry, re-apply and press the parts together.
Points of attention: Contains volatile, highly inflammable solvents. Appropriate precautions should therefore be taken during storage or when working with the adhesive.
After Use:
Stains/residue: Remove wet glue stains immediately. Dried glue residue and glue stains in clothing can be removed with acetone.
Storage conditions: Store in a dry, cool and frost-free place.
Properties
Liquid
Crystal-clear
Fast drying
Temporarily adjustable
Does not wrinkle paper