Ultrasonic Deep Facial Cleansing Machine

An ultrasonic skin scrubber cleanses the skin using vibration, you’re right. But, instead of a rubber format, these scrubbers are made of metal and use high-frequency vibes via sound waves to transform skin from cell to cell. 

“Cells start ‘talking’ to each other and your pores open wide, so dirt and debris are gently vibrated and scrubbed away,” Green explains. In removing dirt and debris, she says that these ultrasonic skin spatulas are able to gently exfoliate the skin, as well as collect what’s being sloughed off.

How to Use As Paviol points out, ultrasonic skin scrubbers are water-based exfoliation devices. As such, in order to work, he says it has to have a flat shape and must be used while the skin is wet, which allows the ultrasonic vibrations to form and build. While exact use will vary from device to device (so it’s essential to read the directions), as a general rule of thumb, ultrasonic skin scrubbers are to be used as follows.  

1.Wet your skin. Remember: An ultrasonic skin spatula will only work if the skin is wet. 

2. Run the spatula along your skin. Using gentle pressure, push the scrubber along your skin in an upward and/or outward motion. For example, if you’re scrubbing your forehead, start between your brows and push up. While the actual direction of the device can change, we recommend going upward and outward, as it prevents the debris from potentially pooling in the creases surrounding your nostrils, into your brows, and so on. 

3.  Go slow if you’re trying to extract. While running the device along your forehead and cheeks will significantly improve the appearance of your skin, if you have blackheads, the slower you go, the deeper and more effective the spatulas effects will be.

4. Follow up with your regular skincare routine. After you finish scrubbing, feel free to cleanse, tone, and moisturize as you regularly do. If you don’t normally tone, know that following a scrubbing sesh, doing so will help close up your pores to keep them fresher for longer. 

5.Clean your device when you’re done. Once you finish your spatula sesh, it’s imperative that you disinfect your device. After all, it’s not covered in all the gunk that was filling your pores. 

           (switch button) 1.press and hold for 2 seconds to turn on . the default setting peeling lifting mode for the first time , and the ld1 indicator is always on .

2.Gear switch, short press 4 gear to switch in cycles,followed by power charger mode, LED2 indicator flashes quickly ION-import mode, LED3 the indicator lights is always on, ION-import mode, the LED4 indicator light is always on.

3.The buzzer will tick once the short press is turn on and the mode is witched, and the buzzer will tick twice when it is turned off by a long press for 2 seconds . press and hold for 2 seconds to shut down.