Universal Float Switch Water Level Controller For Water Tank

Universal Float Switch Water Level Controller for Water Tank. 
A float switch is a mechanical switch that floats on top of a liquid surface. As the liquid level goes up or down, it moves vertically with the liquid level. Depending on the counterweight and pre-set trigger, the mechanical switch opens or closes allowing an electrical current through it to the connected device e.g a pump. Typically, this connected device either stops or starts the inflow of the liquid. A float switch consists of a hollow floating body and an internal switch, also called a sensor. The most common internal switch is a reed switch, so there is also a magnet inside the body. There are other types of internal switches, but the working principle that they open/close due to gravity and water level moving the float switch vertically up or down is the same. Therefore, the mechanical switch creates an open or closed electrical circuit.

Material: PP
Protection class: IP65
Working pressure: 0.1MPa
Rated current/voltage: 16A/ 250V
Operating temperature: 0~75℃
Electrical life: 1 x 100 000 times
Mechanical life: 5 x 100 000 times
Cylinder: 61x55mm/ 2.4x2.17inch