USB To RS232/485/TTL Interface Converter Industrial Isolated With Original

Introduction:

This is an industrial USB to RS232/485/TTL isolated converter with original FT232RL or CH343G inside. It features embedded protection circuits such as power isolation, ADI magnetical isolation, and TVS diode, etc. What's more, the USB TO RS232/485/TTL comes with an aluminium alloy enclosure, make it solid and durable to work. The USB TO RS232/485/TTL is very easy to use, fully automatic transceiving without delay. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for industrial control equipments and/or applications with high communication requirement.

Features:

1. USB TO RS232, USB TO RS485, USB TO TTL (UART) 2. Adopt original FT232RL or CH343G, fast communicating, stable and reliable, better compatibility 3. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal 4. Onboard unibody magnetical isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption 5. Onboard TVS (Transient Voltage Suppreor), effectively suppre surge voltage and transientke voltage in the circuit, lightning-proof & anti-electrostatic 6. Onboard s-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance 7. Fully automatic transceiver circuit with no delay, ensures the USB port communicates with different interfaces fastly and stably, without interfering each other 8. Onboard TTL serial 3.3V/5V voltage translator, config the TTL level via switch 9. Aluminium alloy enclosure with sand blasting and anodic oxidation, proce opening, solid and durable 10. 3 LEDs for indicating the power and transceiver status 11. High quality USB-B and RS232 connectors, smoothly plug/pull

Specifications:

1. Product type: industrial optically isolated converter 2. Baudrate: 300-921600bps 3. Host port: USB 4. Device port: RS485/RS232/TTL 5. USB: (1). Operating voltage: 5V (2).Connector: USB-B (3). Protection: 200mA s-recovery fuse, isolated output (4). Transmiion distance: ~5m 5. RS485: (1). Connector: screw terminal (2). Pins: A+, B-, GND (3). Direction control: hardware automatic control (4). Protection: 600W lightning-proof and surge-suppre, 15KV ESD protection (reserved 120R balancing resistor solder pads) (5). Transmiion distance: ~1200m (6). Transmiion mode: point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more) 6. RS232: (1). Connector: DR9 male (2). Protection: TVS diode, surge protection, ESD protection (3). Transmiion distance: ~15m (4). Transmiion mode: point-to-point 7. TTL (UART): (1). Operating voltage: 3.3V/5V (2). Connector: screw terminal (3). Pins: TXD, RXD, GND (4). Protection: clamp protection diode, over-voltage/negative-voltage proof, shock resistance (5). Transmiion mode: point-to-point 8. LED indicators: (1). PWR: red power indicator, light up when there is USB connection and voltage is detected (2). TXD: green TX indicator, light up when the (3). USB port sends data (4). RXD: blue RX indicator, light up when the device ports send data back 9. Operating envment: (1). Temperature: -15℃ ~ 70℃ (2).Humidity: 5%RH ~ 95%RH 10. Operating system: Windows 10 / 8.1 / 8 / 7 / XP

Dimensions:

Weight: 0.192KG

How to Use:

Please refer to: http://www.waveshare.com/wiki/USB_TO_RS232/485/TTL

Packing List:

1 x USB TO RS232/485/TTL Adapter 1 x USB Cable x1

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.