USB3.1 Flat Data Flexible Soft Extension Cable Type C Male To Type-C Female Thin Short Ribbon Adapter Gen2 10G Full Speed USB-C

SPEEDIER USB 3.1 type C to type C Flat Cable

Brand name: ADT-LINK

Product name: USB 3.1 flat Cable

Product model: UTTseries

Product name: USB3.1 USB-C to USB-C extension cable

Wire length: 3cm-3m (the length can be customized)

Adaptation range: USB3.1 type-C to type-C

Transferspeed: support of increased up to 10Gbps (50cm Max.), 5Gbps (200cm Max.)

Current capacity:3A (Lengthwithin 50cm supports 3A, within 2m supports 1.5a)

Application: GPS navigator, ROCK Pi 4 raspberry Pi microcontroller development board, built-in USB device extension switch use, convenient for brushle head, steering engine head, small s head, SLR handheld head USB power supply and AV transmiion and so on

ADT USB series Part-Number Description:

Remark 1 : Speed : Gen2 speed is supported within a cable length of 50cm, and gen1 speed is supported within 1 meter.

Remark 2 : Male to male TX-RX signal exchange data line, CC pin is directly connected, no need to distinguish between one port (master)and another port (slave).

Remark 3 : male to female TX-RX signal is directly connected to the extension cable, and the one port (master)and another port (slave)must be distinguished when using.

Remark 4: one port means to connect to host port, another port means connect to the hard disk box camera and other equipments etc.

Remark 5 : T4A/T5A with , support USB3.1 (10G/Bps ) positive and negative plug, both are 10G high speed

T4B/T5B does not have a E-mark&, and also supports positive and negative insertion. The positive insertion can support USB3.1 high speed but the reverse insertion only supports USB2.0 low speed

Cable length Description:

The length of the wire in our shop refers to the part of the visible wire, excluding the PCB and the connector, if it contains the PCB and the connector, add about 4cm. The total length is about 8 cm, please refer to the 4cm dimension in the figure below.

Product advantages: 1. Wire advantage, using German patent ed wire. 2. Cable length advantage, from 3 cm to 3 meters can be customized. 3. The differential signal has no via hole design, the signal is pure, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit phenomenon, and the product is durable. 4. The PCB is made of high-quality materials with high frequency and low resistance. The PCB is made of precision. The PCB uses high TG plates. The thickne of the copper material is thickened to 1oz. The PCB power circuit is strengthened and the use of 2 5V power core wires is strengthened to transmit current more strongly. Support up to 3A.

About shipping

Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 




Special Announcement:

Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .




Your 100% satisfaction is very ant to us

If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.