Voice Record Playback Board AI Speech Recognition Module Bird Tweet Burglar Alarm Dog Barking Doorbell Alice Christmas Music IC

Package : SOPis_customized : YesModel Number : Voice Playback ModuleOperating Temperature : -20~85 CelsuisDissipation Power : noneApplication : Electric ToyCondition : NewType : Logic ICsBrand Name : IS : Mainland ChinaFeature 1 : AI Recognition ModuleFeature 2 : Speech Recognition ModuleFeature 3 : Offline Voice Control Module9495-AIntroduction:1.Operating Voltage:3-5V2.Standby Current:.Item Model:YUSIJIE-1812BY3>.Input voltage:DC 3V-5V4>.Work Temperature:-40℃~85℃5>.Work Humidity:0%~95%RH6>.Size:30*24*2.5mmUsing steps:1>.Connect as wiring diagram;2>.Connect right working voltage;3>.Speaking into the microphone;4>.The speaker will play the corresponding voice;Note:1>.There are same pins are have no function and used for manufacturer.User no need to use them.2>.Need to prepare accessories in advance.GY19550-L1.Description:It is a voice control module.SU-03T is a low-cost,low-power,small-size offline voice recognition module,which can be quickly applied to smart homes,all kinds of smart home appliances,toys,lamps and other products that require voice control.2.Feature:1).Using 32bit RISC core,running frequency 240M.2).Support DSP instruction set and FPU floating point arithmetic unit.3).FFT accelerator:supports up to 1024 points of complex FFT/IFFT operations,or 2048 points of real FFT/IFFT operations.4).Built-in high-speed SRAM,built-in 2MB FL ASH.5).Built-in 3W,mono AB power amplifier.6).Support 1 electret microphone.7).Support 12S input/output.8).Support 5V power input.9).Built-in 5V to 3.3V,3.3V external load does not exceed 150mA.10).RC 12MHz clock source and PLL phase-locked loop clock source.11).Built-in POR (Power on Reset),low voltage detection and watchdog.12).All GPIOs can be configured as external interrupt input and wake-up sources.13).1 standard SPI Master interface,the highest rate is 30MHz.14).One SPI Slave interface has a maximum rate of 30MHz.15).A full-duplex UART has a maximum rate of 3Mbps.16).1 I2C master/slave controller with a maximum speed of 400kHz,2 PWM outputs.17).One 12-bit SAR-ADC has a maximum sampling rate of 450Khz.3.Parameter:1).Product Name:Voice Control Module2).Support Interface:UART/GPIO/ADC/PWM/SPI /12S/I2C3).Average Working Current:60mA4).Power Supply Range:power supply voltage 3.6V~ 5.5V5).Supply Current:200mA6).Work Temperature:-20℃~85℃7).Work Humidity:5%~95%RH8).Size:21*17*1mm4.Support Speaker Specifications:1).VCC=5V,4ohm load,provide up to 2.9W output power2).VCC=5V,8ohm load,provide up to 1.8W output power.GY19551-M1.Description:It is a offline speech recognition module.SU-10A is a low-cost,low-power,small-size offline voice recognition module,which can be quickly applied to smart homes,all kinds of smart home appliances,toys,lamps and other products that require voice control.2.Feature:1).32bit RISC core,running frequency 240M.2).Support DSP instruction set and FPU floating point arithmetic unit.3).FFT accelerator:supports up to 1024 points of complex FFT/IFFT operations,or 2048 points of real FFT/IFFT operations.4).Built-in high-speed SRAM,built-in 2MB FL ASH.5).Built-in 3W,mono AB power amplifier.6).Support 1 electret microphone.7).Support 5V power input.8).The default voltage of the UART interface is 5V,and it can also support 3.3V.3.Parameter:1).Product Name:Offline Speech Recognition Module2).Connection method:PH2.0mm pitch connector3).Support interface:UART/MIC/SPEAKER4).Average Working Current:60mA5).Power Supply Voltage:3.6V-5.5V6).Supply Current:200mA(Min)7).Work Temperature:-20℃~85℃8).Work Humidity:5%~95%RH9).Size:33*28*9mm4.Support speaker specifications:1.Under VCC=5V,4ohm load,it provides up to 2.9W output power2.Under VCC=5V,8ohm load,it can provide up to 1.8W output power