Voltage Regulator 2000 Watt AC - 220 Volt Dimmer SCR Power Regulator Motor Speed Controller Home Improvement Regulators 2000W

This voltage regulator is a specially improved circuit for motor speed regulation. The minimum output voltage can be adjusted by a precision multi-turn potentiometer.  The voltage regulator has a peak voltage absorption circuit to effectively protect the high-power thyristor, which has a longer life and is more durable.  Parameter: Use voltage: AC 220V Maximum power: 2000W Voltage regulation: AC 50-220V Specification size: high temperature resistant FR-4 circuit board circuit board about 36MM*48MM External size: 48MM*60MM (knob direction)*28MM (high) Thyristor withstand voltage up to 1200V/current 25A 1.6mm thick epoxy copper clad laminate  Instructions:      Connect this product to the circuit of the table lamp or the electrical appliance in series (ie disconnect any one of the live or neutral wires of the table lamp, the electrical appliance, etc., and connect the two wires of this "product") rotary potentiometer The rotary rod can play the role of light and dark adjustment, speed adjustment, pressure adjustment and temperature adjustment; it is very convenient to use.Note: This module has an AC voltage of 220V input and an AC output. It can only step down the voltage and adjust the voltage when connected to a load. It is useless to connect a multimeter without load. It is not a transformer and cannot be connected to a DC load. The thyristor is mainly used for resistive loads (heating wire incandescent lamps, etc.).Fuses are not omnipotent and have a reaction time. If the current is too large, in addition to burning out the fuse, the module may also burn out. 

window.adminAccountId=232067415;





">