Wireless Dog Fence No-Wire Pet Containment System Rechargeable & Waterproof Dog ining Fence System Collar KDX882 15-28nf

Wirele Pet Dog Electric Fence Containment System Waterproof nsmitter Collar KPHRTEK 882 Rechargeable For 3 Dogs 28nfModel:KDX882

Receiver Build-in Rechargeable Battery, nsmitter need power

Product Description

The electronic wirele Pet fence system is reliable and safe for pet ining. It is completely out of the hale of cabling and is very convenient to establish safe areas for pet behavior. Centered around the nsmitter, the remote control can reach a radius of up t0 300 meters and cover up to 28 hectares. In this large space, your dog can play freely and safely without worrying about their limited activities or getting lost. As a result, it can be widely used for ining in family or outdoor activities.

Main Features

1. Complete Wirele Fence System, can be used outdoors

2. Circular signal region based on nsmitter and remote control center Control range up to 300 m

3. If the dog is outside the remote control range, automatically start the warning tone and electrostatic shock mode

4. 5 different distance nsmitter signals, representing the remote range

5. nsmitter and receiver do not need to use the code, after the boot can receive the normal operation of the signal

6. One nsmitter supports multi-collar receivers

7. Waterproof and rechargeable receiver collar

8. Reflective tape fluorescent TPU, Increase night safety

9. 882 nsmitter without rechargeable battery.

nsmitter operation

1. Turn the nsmitter power on or off

Pre the ON/OFF on to turn on the power nsmitter, the LED power indicator will light red and the signal distance will be displayed on the screen. To turn off the nsmitter power, pre the ON/OFF on to turn off the power.

2. Set the range of the remote control

The remote range is the linear distance between the nsmitter and receiver rings, depending on the strength of the nsmitted signal. The value of the nsmitted signal is more and the range of the remote control is farther. For this wirele fence, the maximum remote range is up to 300 meters (LED number represents the number of meters, 30m conversion code is equal to 32.8yards), pre the "+" or "-" on on the nsmitter to increase the distance fro0 meters or cut back.

The value displayed on the nsmitter indicates the distance controlled

Notice

The remote control distance is measured in open area it will be affected by electroic waves or obstacle around the fence system, and the distance will be reduced slightly

Receiver collar operation

1.Aemble the parts into receiver collar

Aemble the part into the receiver and aemble the 2 contact probes onto the screws of the receiver. (There are two types of probes in the package, a short probe for small dogs and a long probe for medium and large dogs.) The TPU is then paed through the back of the receiver and two holes.

2.Power ON/OFF the receiver

Turn the receiver power on/off and pre the ON / OFF on to turn on the receiver. A short "di" sound will be heard and the red LED will illuminate. lf the nsmitter is turned off or out of control, the "di" sound will sound off the receiver every second, or ensure that the nsmitter is on and within the remote range and is now displayed on the nsmitter screen.

3. Charge for the receiver collar

The receiver is rechargeable. When the LED power indicator is fing red, the receiver is low Please charge Once fully charged, the LED will turn solid green

Note: Please charge at least 4 hours in the first time.

Receiver charging waterproof function, can be used in rainy days,

Dogs collar with TPU reflective material, can also easily find pets at night.

Tip: The machine will enter the sleep power saving mode after g in the working state for 5 minutes. In the sleep mode, the machine will automatically wake up and enter the working state.

Charging cable: Double-head selection can charge the nsmitter and receiver at the same time, which is convenient to use.

Start ining your dog

1. Put the receiver on the dog's neck and check that the sp is correct;

2. Pre the + / - on on the nsmitter to set the nsmitted signal distance. The value you set will be displayed on the screen.

Note: The remote control range is measured in the open area and will be affected by

electroic waves or obstacles around the fence system and the distance will be slightly reduced;

3. P the nsmitter at a distance of l.5 meters above the ground without any metal wall

around it. Thereby obtaining the best remote control range.

ant note

1. Wirele fence system is only for dog

2. A low battery level may result in intermittent operation. Don't use it and charge it

immediately to get low battery

3. Don't put the collar on the dog for more than 10 hours every day.

4. Keep the receiver away from children

5. Please read all instructions before using this product.

Receiver:3.7V 400 mAh LiP