Bluetooth Sleeping Headphones Sports Headband Thin Soft Elastic Comfortable Wireless Music Headset Sleep Mask For Eyes Sleeping

This is the best smart gadget you can think of. this serves a major purpose. It can be used as a headset, it can use as a sleeping face mask, it can use as sports equipment, and a headband.

• Bluetooth version: 5.0
• Bluetooth transmission distance: 10M
• Music playing time: Maximum sound 7h, medium volume 10 hours
• Microphone distance: 1m
• Bluetooth standby time: 72h
• Battery capacity: 150mA / h
• Battery power: 0.55w
• Horn impedance: 32 ohm
• Horn power: 0.02w
• Frequency range: 2.4-2.4835ghz
• Sensitivity: 45dB
• Transmitting power: 6dB
• Audio output distortion: 0.6%
• Audio output SNR: 93dB
• Charging time: 1-2 hours
• Maximum input voltage: DC 5V
• Maximum input current: 150mah
• Maximum input power: 0.55w

Instructions

Pairing to Your Device

To pair to your phone or device for the first time hold down the play button located on the control panel for 4 seconds until you see a red and blue flashing light. Open your settings on your phone or device. You will see the name”BT-01″ in the list, select it and your device will be Connected.

If a password is requested, please use the default:0000

Next time you switch on your product, it will be connected automatically.

Taking Calls

To take an incoming call press the Play/Pause button.If you are listening to music it will automatically stop. To end a call press the Play/Pause button. Double-click the Play/Pause button will re-dial the last number.

Playing Music

Select your music as normal from your phone or device.

Use the buttons on your control panel to Play-Pause & Skip tracks.

Power On

Simply hold down the Play/Pause button for 4 seconds to turn On.

Power Off

Simply hold down the Play/Pause button for 4 seconds to turn off.

-Wireless Headphones will shut down if the connection failed in 3 minutes.

-Double click button”+”to activate SIRI on iSO device

Charging Instructions

Fully charge the battery before first use.

Use the supplied USB cable, simply plug into the charging port of the headwear.

Now plug the other end of the USB cable into your PC or laptop.

During charging, the LED Status Light will turn to be red on the control panel.

When charging is completed, the red light will change to blue.

It will take about one hour to get the battery fully charged.

Buttons Interface

①Volume Down（long press）/Previous Song（short press）

②Play/Pause/Answer/Hang Off/Redial

Power On/Power Off（long press）

Play/Pause（short press）

Answer/Hang Off（short press）

Redial（double click）

③Volume Up（long press）/Next Song（short press）

④LED Status Light

-Long press Play/Pause button for 2 seconds to reject a incoming call.