XH-W3002 DC 12V 10A Digital LED Temperature Controller Heating Cooling Temperature Control Switch Probe LCD Display

Description:

Measurement Range:- 50 to 110°C Material:Circuit board + Plastic Size:60 * 45 * 31mm / 2.36 * 1.77 * 1.22inch Measurement Accuracy:±0.2° Control Accuracy:±0.1° Voltage:12V/24V/220V Display Type:Digital Load Power:120/240/1500W Measurement Input:NTC10K waterproof probe L = 1 Output Capacity:Max 10 Package Include:1pc Digital LED Temperature Controller

Feature: Heating/refrigeration modes, users can set the start/stop temperature freely;With large and clear LED display for better readability Easy to use:Three ons for easy operation, to set start temperature, stop temperature, corrected temperature, delay start time. Two Work Mode:Heating ( start temperature is le than stop temperature), Cooling ( start temperature is above than stop temperature) Applycation:Waterproof r, can be used to detect water or other liquid non-corrosive. objects temperature, for aquaculture,ornamental fish and other Operation Instructions: Set the start temperature; pre the up on on one time to show the starting temperature, pre the upper key for about 3 seconds, start temperature and digital flicker, and set the required temperature value through the upper and lower keys. Set the stop temperature: pre the on to show the stop temperature, pre the key for about 3 seconds, stop the temperature, and digitally flicker, and check the required temperature value through the upper and lower keys. Restore factory setting: under the condition of electricity, at the same time hold down the upper and lower keys, the digital tube display 888 then automatically jump to the detection temperature, can restore the factory setting; Start temperature < stop temperature = heating mode Start temperature > stop temperature = refrigeration mode

Prompt: When setting up the heating mode, if the temperature value is set upside down, the output indicator will not be lighted and the load will not work. If the above situation occurs after the completion of the setup, we can check whether the temperature value of the set is reversed.

Notes: 1.Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2.Please allow 1-3cm measuring deviation due to manual measurement.

Package Include: 1 x 12V/24V or 110-220VDigital LED Temperature Controller

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.