XL6019 Automatic Step-up Step-down DC-DC Display Adjustable Converter Power Supply Accessory

XL6019 Automatic Step-up Step-down DC-DC Display Adjustable Converter Power Supply Accessory
Module nature: non-isolated buck-boost module
Input voltage: 5-32V
Output voltage: continuously adjustable (1.2-35V)
Output current: 1.5A (MAX)
Input current: 4A (MAX)
Output power: 20W for natural cooling, 25W (MAX) actual power with heat sink
Maximum output power = input voltage * 4A * conversion efficiency
Output ripple: input 12V output 24 0.5A ripple 30MV 20M bandwidth (for reference only)
Operating temperature: industrial grade (-40℃ to +85℃) (if the ambient temperature exceeds 40 degrees, please reduce power usage or increase heat dissipation)
Full load temperature rise: 45℃
Operating frequency: 400khz
No-load current: typical 15mA (5V to 12V)
Load adjustment rate: ±0.5%
Voltage adjustment rate: ±0.5%
Dynamic response speed: 5% 200uS
Enable control port: Yes, high level 1.4V-VIN (ON), low level 0-0.8V (OFF), default high level
Short circuit protection: No (please install a fuse or protection circuit at the input)
Input reverse protection: No, please use our reverse protection board or connect a diode in series at the input.
Installation method: Can be fixed with screws (fixing hole 3mm), 2 fixing holes
Wiring method: Welding, can be directly welded on the PCB after adding pins
Package includes:
Boost and buck module X1
window.adminAccountId=240072535;