GYVRM 9-20V 12V 18V to 12V 3A 5A 6A 8A 10A 12A Buck Boost DC DC Converter Step-down/up Voltage Stabilizer Car Boat Power Supply

Product parameters







DC-DC 9-20V TO 12V 3-12A Voltage regulator module





Instructions







Applications
Wide range of applications: Industrial automation control. Research equipment, LED lighting, industrial control equipment, car equipment, power equipment, instrumentation equipment, medical equipment, refrigeration empty purifier,Electronic refrigerator, liquid crystal display, LED display, audiovisual product, security imported computer chassis, digital products and various instruments and other fields。
Qualification certificate
User's Manual
The 12V battery voltage is converted to a 12V DC voltage.
Precautions (Uncertain installations, please contact our company before installation)
！！！Long-term use cannot be fully loaded, please reduce power or choose more powerful products, best 50% of maximum power.
1. Make sure that all the polarity is correct, and the anti-negative conversion converter (except for input tape reverse protection)
2. Make sure the cable is pure copper wire, the input and output cables cannot exceed 2 meters, and the output will be removed by more than 2 meters. The voltage will be reflected. If the line is extended, you need to increase the line diameter according to the corresponding multiple.
3. The cable needs to be connected to the thread, please refer to the wire diameter size and securely connected.
4. The input terminal is required to connect the fuse or air switch, and you need to select the corresponding fuse or switch] (except the input belt fuse)
5. Make sure the battery capacity is large enough to provide sufficient energy. If the input energy is not enough, the voltage will be reduced.
6. Make sure the installation environment is well ventilated, so as not to protect over temperature protection, limit current output
7. Cannot connect directly to solar panels or wind wind turbines
8. Non-charged models cannot be charged battery and lithium batteries
9. When connecting the input test with DC power supply, the input should not exceed the voltage range of the battery, and no overvoltage protection (can be customized).
Installation step (four lines or four / five terminals)
1. Turn off all power supplies and load switches
2. Before the wiring, pay attention to all positive and negative poles
3. Connection (OUTPUT-) to load negative, connection (OUTPUT +) to load positive
4. Connect the fuse or air switch to (Input +) input the positive cable, then connect (Input +) to the battery positive, connect (Input-) to the battery negative electrode
5. Make sure all positive and negative connections are correct (do not reverse, reverse the burnback converter), turn on the power and load switch
(Note: If the ACC port is connected, connect the ACC to the ignition switch: If you do not need to use the ACC function, connect the ACC to the (Input +) battery "positive.)
troubleshooting
1. Output no voltage, please check if all lines are connected firm, the battery is enough, whether the fuse is burning.
2. Output the voltage, check if the load start current is too large, the ventilation is good, whether the outer casing is heated, whether the cable and the thread are selected and installed, whether it is less than 2 meters, and the input battery has sufficient energy.




Material: Die-cast aluminum housing
Waterproof Rating: IP68
Customization: Yes
Protection: Over current protection, overheat protection, under voltage protection, shock protection
Outlet Length: 13CM±1cm
Wire Diameter: 0.75mm /1mm /1.5mm (varies by current)
Output Voltage: 12V
Output Current: 3A to 12A (varies by model)
Input Voltage: 9-20V


**Robust Construction and Versatile Application**
The GYVRM 9-20V 12V 18V to 12V DC DC Converter is a robust and reliable power supply solution for a wide range of applications. Its die-cast aluminum housing provides excellent durability and heat dissipation, ensuring long-lasting performance in harsh environments. The IP68 waterproof rating makes it suitable for use in wet or damp conditions, further enhancing its versatility. With customization options available, the GYVRM converter can be tailored to meet specific project requirements.

**Comprehensive Protection for Your Devices**
Safety is paramount with the GYVRM converter, as it comes equipped with over current protection, overheat protection, under voltage protection, and shock protection, safeguarding your devices from power surges and unexpected events. The converter's output length of 13CM±1cm provides ample space for connecting to various devices, while the wire diameter varies based on the current to ensure optimal performance and safety. Whether you're powering industrial automation equipment, LED lighting, or medical devices, the GYVRM converter is designed to deliver reliable and consistent power.

**Ease of Use and Installation**
Installing the GYVRM DC DC converter is straightforward, with clear instructions provided to guide you through the process. It is essential to ensure correct polarity and to use pure copper wires for optimal performance. The converter's output is designed to be compatible with a variety of devices, with the caveat that long-term use should not exceed 50% of maximum power to prevent overheating. The GYVRM converter is not suitable for charging batteries or lithium batteries, but it is an excellent choice for a wide range of applications where a stable 12V output is required.