Description
Precision electronic control circuit
Portable and compact size
Metal case
Impulse sealing for power-saving
Adjustable timer creates perfect seals for varying bag thickness
Labor-saving design with long handle
Low power consumption Size:200 mm: 20x11x23 cm
- Use
- Precision electronic control circuit
- Portable and compact size
- Metal case
- Impulse sealing for power-saving
- Adjustable timer creates perfect seals for varying bag thickness
- Labor-saving design with long handle
- Low power consumption
- Size:200 mm/10CMS : 20x11x23 cm
- Use:
- 1.Connect the AC power cord into the outlet, adjust the knob according to the thickness of the material to be sealed to adjust the heating time.
- Place the polythene bag on the sealing surface, then press the handle,When the light is off, the power is automatically disconnected. After about 1-2 seconds, release the handle for a good seal.
- 2.when an excess sealing point appears damaged, it is because the heating time is too long, please turn the knob anti-clockwise to reduce the heating time.
- 3.If the seal is not strong, it is because the heating time is too short. turn the knob clockwise to extend the heating time.
- 4.If a plastic bag sticks to the rubber plate, indicating the cooling time is not enough, extend the cooling time after the light goes out by releasing the handle after a few seconds.
- 5.Dont adjust the knob should once you get the right amount of heating temperature.
- 6.Always UN-plug the AC power cord from the power outlet when not using to avoid consuming power when not in use.
1 x Instruction manual