Jorindo PD To DC Cable TypeC Male To Elbow Adapter Line Lap

Feature:
1. The PD to DC cable is specially designed for laptop charging and supports up to 65W fast charge.
2. PVC material soft wire body and copper wire, strong and wear‑resistant, bending resistance.
3. Type‑C male input interface, 4.0 x 1.7mm elbow DC output interface, support plug and play.
4. The cable is 1.5 meters long and can be connected to the device at any time in the bedroom or office.
5. The charging cable comes with a cable tie, which is convenient to store when not in use, to avoid the messy desktop wires.

Specification:
Item Type: PD to DC Cable
Length: Approx. 1.5 meter / 4.9ft
Current: 3A
Input Interface: Type-C male
Output Interface: Round elbow 4.0 x 1.7mm DC Plug (Outer Diameter: Approx. 4.0mm / 0.2in, Inner Diameter: Approx. 1.7mm / 0.1in)
Material: PVC + tinned copper
Model: JD0107
Cable Tie: Yes
Power: 65W (maximum).

Package List:
1 x PD to DC Cable
Note:
1. This is an adapter plug converter cable that connects to a laptop via Type‑C. You need a Type‑C adapter or a power bank to support it. But the Type‑C adapter or power bank should have enough power (wattage) to charge the laptop.2. Make sure that the wattage (volt and ampere) of the Type‑C adapter is not lower than the input of the laptop (you can check it on the bottom of the laptop). For example, your laptop input is 19.5V 3.33A 65W, then your Type‑C adapter should not be less than 65W, otherwise it will not work properly. Some customers often use their USB phone adapters to charge their laptops, but the power is very small and of course it does not work.3. Please note that not all Type‑C adapters are suitable for your laptop.