Klorane KLORMAN INLINE CHLORINE UNIT

The Klorman Inline Unit is an advanced chlorination system designed for continuous, controlled dosing of solid chlorine into water systems. Klorman is a simple in-line point of use disinfection system that utilizes a compacted calcium hypochlorite chlorine cartridge which releases active chlorine sanitizer into the water flow. Simple adjustment is provided by varying the projection of the cartridge into the water stream to accommodate different flow rates as well as adjustment of waterflow and pressure through the unit. Dosage levels vary with site conditions and treatment water chlorine demand, though sufficient dosage is available to ensure adequate water disinfection. Below are its key specifications:

• Dosage Capacity: Capable of treating up to 500 m³ of water at a concentration of 1 ppm, assuming no chlorine demand. Actual capacity may vary based on flow rate and site conditions.
• Flow Rate: Maximum flow rate of 16 m³/h.
• Operating Pressure: Suitable for pressures ranging from 0.5 to 6 bar.
• Chlorine Output: Adjustable to deliver chlorine concentrations from less than 5 ppm to over 200 ppm, allowing for precise control based on specific application needs.
• Dimensions: Shipping size is approximately 6 inches (15 cm) in length, 4 inches (10 cm) in width, and 10 inches (25 cm) in height.
• Weight: Shipping weight is approximately 4 lbs (1.8 kg).
• Inlet/Outlet Fittings: Equipped with 3/4″ and 1 1/4″ threaded bushings for versatile installation options.

The unit operates without the need for external power, utilizing compacted calcium hypochlorite chlorine cartridges. It is designed for easy installation and maintenance, with adjustable settings to accommodate various flow rates and water pressures. This makes it ideal for applications such as household water supplies, agricultural operations, sewage and commercial water systems requiring consistent disinfection where constant treatment is required in applications without external power or experienced operators.

For optimal performance, it’s recommended to install the Klorman Inline Unit using a by-pass method, allowing for better control and maintenance. Additionally, to prevent potential damage, avoid subjecting the unit to water hammer effects and ensure that operating pressures do not exceed 80 psi.

Please note that the actual dosage capacity and chlorine output may vary depending on specific site conditions, including water quality and system configuration. Regular monitoring and adjustment are advised to maintain desired chlorine levels.