Kmt Digital 2-Way Coaxial Cable Splitter 5-2400MHz Connector, RG6 Compatible, Work With Satellite/Cable TV, Internet, CATV Antenna System. All Power Pass Aerial

About this item

(COAXIAL Cable NOT Included) 
MULTI PURPOSE 2-WAY COAX CABLE SPLITTER: Nickel-Plated digital coaxial cable splitter is used for splits a single digital signal to up to 2 devices. It works with cable TV, satellite, high speed internet or camera, and cable TV, amplifying antenna, amplifier, and other coaxial devices. Compatible with RG59 and RG6 coax cable.

CAREFUL PREMIUM CONSTRUCTION: This coaxial cable splitter box is made of nickel-plated zinc press box, with better weather resistance, rust resistance, stability. The sealed housing increases waterproof protection, and the electronic component inside the device receives the internal pressure of 15 psi. Suitable for indoor, outdoor, wet / dry environments.

LOW SIGNAL LOSS: The frequency range of this coax splitter supports up to 5-2400MHz (2.4GHz), and internal circuit board for better reliability/durability. High shielding structure with low insertion loss, high return loss and isolation for better performance on TV, satellite and all other devices’ signal. Between 1750 and 2400MHz there is low signal loss of only 4.5db on each output port improving performance and speeds.

INSTALLATION STEPS

1. Prepare the coaxial cable and F-type male connector

2. Strip the coaxial cable

3. Connect the coaxial cable to F-type male connector

4. Connect the coaxial cable to the coaxial splitter. In order to make your satellite connection balance and easier, all coaxial ports of the dispenser are power passing. 

(NOTE: ONLY One Highest Voltage is Allowed to Pass At A Time)
 

WHAT YOU GET

1x Coaxial Splitter, 1x Screws. High-quality metal material makes the product last longer, and attention to detail is designed to provide a better using experience.

(Some of the images may not show the actual item but are for displaying/explaining how the device works)