Lamp Operation Controller Manual Light Remote Control F

Feature:

1. Used to control light for modify the simulation light system of remote control vehicle.

2. It is more fast and convenient with the RF remote control.

3. Multi modes for you to choose.

4. With built-in battery, practical and money saving.

5. Nice accessory for model car light system.

Installation Method:

1. Power supply

The machine can accept DC12V to 24V power supply. The red cable shall be connected to the positive pole and the black cable to the negative pole. Please select the appropriate power supply according to the LED

2. The LED output

The peak output current is 6A. If the main engine overheats, please reduce the load.

3. The Remote Controll

Please pull out the insulation parts before use. RF wireless remote control signals can pass through the barrier without aiming at the host during operation. In order to receive the remote control signal correctly, do not install the main machine in the closed metal parts. Temote battery is 3V CR2025 type, please replace the same type of battery only.

Specification:

Dynamic Pattern: 8 Model

Dynamic Speed Grade: 10 Grade

Illuminance: 10 Grade

PWM Grade: 256 Grade

Smooth Dimming Effect: Yes

Working Voltage: DC12-24V

Output Current: Peak 6A

Remote Control Mode: RF Wireless

Remote Control Frequency: 433.92MHz

Remote Control Distance: Open Area > 30M

Remote Control Battery: Built-in Button Battery

Weight: Approx. 23g

Package List:

1 * LED Controller

1 * Remote Control