PLUMBING INSTALLATION (Do foL ust Tools) .Shower extension arm is needed (not included) to 'install the appliance (Fig.02) . Before installing the appliance, run water out to drain out all plumbing dirt and to purge out any air bubbles /pockets. The minimum income water pressure is 1.0 mca (1.5 Psi or 10 KPA or 0.10 Bar),The maximum pressure is 40 mca (60Psi or 400KPa or 4Bar). Residential plumbing systems with unstable pressure or pressure above than recommended require the installation ofa pressure stabilizer valve. . Pressure reducer device is already set in the inlet water nipple. Remove the reducer for low water pressure less than 08 mca/80KPa/0.80 Bar (Fig.04). Place PTFE tape (Teflon) around the inlet water nipple thread (Fig.04).
Specifications
Key Features
Pressure reducer device is already set in the inlet water nipple. Remove the reducer for low water pressure less than 08 mca/80KPa/0.80 Bar (Fig.04). Place PTFE tape (Teflon) around the inlet water nipple thread (Fig.04).