Motion Sensor LED Night Type Rechargeable Induction Lamp for Wardrobe Bedside Cabinet Mirror Wireless Led Strip Tube

Features:

1. The light source is LED, the length is different, and the quantity of led bead is different;

2. The install method is magnetic suction type. Tear off the adhesive on the back of the iron sheet and stick it on the wall or cabinet, and stick magnet strip onto the back of the lamp. The induction lamp can be sucked with the magnet and iron sheet.

3. The light will turn on automatically when someone go into its induction range, and will turn off automatically within 25 seconds after all leave.




Specification:

Name: PIR motion sensor cabinet night light

Length: 10cm, 20cm, 30cm, 50cm

Lighting Color: Cool White(6000-7000K)/Warm White(2800-3500K)/3 Color in 1 Lamp

Voltage: DC5V




Function introduction:

1. The single color lamp

Press the switch for the first time: always on mode;

Press the switch for the second time: night sensing mode;

Press the switch for the third time: all day sensing mode;

Press the switch for the fourth time: OFF;

Press the switch all the time: adjust the brightness

2. The lamp 3 color in 1 lamp (NOTE: the induction function only work in the dark)

Short press the first, the lamp will be on, and the lighting color is cool white. The mode is induction, and in this mode long press about 2s,the lamp will flash twice, then will be into always on mode, the lighting color will not change. Short press again, the lamp will turn off.

When the lamp is in the induction mode, short press the switch, the lamp will change the lighting color.