On Call Plus On Call Blood Glucose Machine

The On Call® Plus makes monitoring blood sugar level easy and affordable. Once the sample is provided the device transmits the results within 10 seconds. With its relatively low cost, keeping check of blood glucose level is simple. The user can take the sample from the fingertip of the forearm. Only a very little amount of sample is required for the device to do an analysis.

How to Use

1. Insert a test strip into the strip port, contact bars end first and facing up, to turn on the meter and display all the display segments. If the audio option is on, the meter will beep, signaling the meter is turned on. Make sure that the code number that appears on the display matches the code number (CODE) on the test strip vial. If not, make sure to locate and insert the code chip that came with the box of strips. If the codes still do
   not match, do not perform a test. You will need a new package of test strips to perform a test.
2.  The blinking test strip and blood drop icon will indicate that the test strip is inserted correctly and a drop of blood can be added.
3.  Touch the sample to the tip at the end of the test strip. If the audio option is on, the meter will beep to indicate that the sample is sufficient and that the measurement has started. The meter will not turn on if the test strip has been inserted incorrectly.
   DO NOT:
   • Apply sample to the front or back of the test strip.
   • Smear the blood drop onto the test strip.
   • Press your finger against the test strip.
   • Apply a second drop of blood.4. The meter will count down from 9 to 1 and then display the measurement results. The meter will also beep to indicate that measurement is complete. To mark invalid results and to prevent them from being included in the 7, 14 and 30 day averages, press the M and S buttons together. A pound sign (#) will appear on the display to show that the result will not be included when calculating the 7, 14 and 30 day averages. If a result is marked by accident, press the M and S buttons again to unmark the result. After marking the invalid result, run the test again with a new test strip.
   If an error message appears on the display, refer to the Trouble Shooting
   Guide on page 32. If a “HI” or “LO” error appears on the display, refer to “HI” and “LO” messages below.
   5. After inspection, record valid results in your logbook with the date and time, and compare them to the target goals set by your healthcare professional. Refer to Suggested Testing Times and Target Goals on page 30 and your logbook for more details on your target blood glucose concentration goals.
   6. Remove and discard the test strip.