Pattex PL 150 Instant Tack

Pattex-pro PL150 Adhesiveis suitable for interior and exterior applications for bonding and mounting. It ensures a permanent bond, and is UV, weather and vibration resistant.Can be used for all absorbent and non-absorbent materials, such as Bricks, Ceramics, Concrete, Hardboard Drywall, Plywood, Stone, MDF, Wood, Metal, Rigid PVC, Polystyrene, (etc. except PE, PPTE, and Acrylic glass), painted/coated surface and mirrors. Not suitable for bonding with constant exposure to moisture.
Surface preparation:
Ensure surfaces to be bonded are clean and free of dust, grease or oil. Surfaces should not be visibly wet or continuously damp.
Substrates must be stable. Remove the dirt with the appropriate solvent or sand down surfaces and clean afterwards from the dust. Before application, mask off the adjacent area with foil or tape, if necessaryAdhesive application:
Apply adhesive onto one of the surfaces: 1) In spots in order to smooth uneven surfaces, 2) in wave-like form for higher initial tack with wide surfaces or 3) in straight strands for smaller surfaces. In case of outdoor use, apply vertical strands.
One surface should be porous to ensure a solid, secure bond because solvent has to evaporate. For two non porous substrates apply PL150 in vertical strands so that the solvent has the possibility to evaporate
To ensure proper bond, press firmly so that all surfaces are in contact with adhesive.Application temperature:
-10 to +35 °COpen time:
Approx. 10 minutesDrying time: