Phelistar Outdoor Digital TV Aerial Antenna + 3 FREE GIFTS

This antenna is UHF AND VHF signal receiver enabled that helps your decoder or your digital TV receive the signals perfectly. With the design of the folding oscillator, five units and V reflectors, it has a strong directional and wide frequency band. The printing plate impedance matching device can effectively receive and transmit digital TV signals. It is convenient for users to install and use the cylindrical support rod in different diameter. The number of compatible dvb-t/H, dvb-t 2, DMB- T/H, isdb-t, atsc-t, ADTB- T, etc. Signal output interface: English F female head Technical parameters: Signal receiving parameters: Frequency range: 470 MHz -860MHz Value added: 7 dB Output impedance: 75 ΩThe standing wave ratio: less than or equal to 2.0 Ratio: greater than or equal to 15 dB Support bar diameter: Φ 30 mm ~ 45 mm Interface form: English F female head Polarization mode: horizontal Working temperature: - 40 ℃ ~ 70 ℃ Relative humidity: 5%~95% Air pressure: 86kPa~106kPa Physical parameters: Product size: 420mm x 325 mm x 245 mm The connection procedure is quite simple, just connect the antenna to the pole and position it facing the mask signal distributor then connect to the decoder or digital. Once the signal is received, scan your TV/decoder and you are ready to receive the digital signal clearly. This Combo pack comes with a coaxial cable, 2 FREE Extra connectors for TV and decoders, FREE Cable clips and a FREE Audio Cable