PIKASOLA 1000W 48V Permanent Magnet Wind Turbine Generator 3 Blades Economy Homes Windmill for Wind Solar Hybrid System 2.5m/s Start Wind Speed with Controller for Wind Solar System (48V)

1. Principle: horizontal shaft wind turbine generator, refers to the horizontal installation of shaft, parallel to the ground. The wind drives the blades to generate kinetic energy, which in turn drives the engine to generate electricity. Core components: blade + generator (engine) + rotating body + wind tail2. Wind blade: 37.4 inch in length, made of nylon carbon fiber. The longer the blades are, the more kinetic energy they generate and the more power they produce. Nylon material waterproof, corrosion resistant, lightweight, high efficiency.3. Generator: three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet. A fully integrated voltage regulator that automatically shuts down when the battery is fully charged. The fan is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage4. Rotating body: with yaw adjustment system, the wind direction position is automatically read and the rotor position is adjusted to capture the maximum wind energy. The tail fin is designed according to the aerodynamic principle, with low starting speed and low vibration.5.Remarks: our products are designed after repeated experimental testing, and the parameters are real, not false. Wind turbine parameters can be customized, please contact us in time if you have any questionsHigh efficiency1.Three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet.2. A fully integrated voltage regulator that automatically shuts down when the battery is fully charged.3.The fan is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage.4.The unique magnetic circuit design makes the starting torque very small, which can effectively ensure the wind turbine's breeze starting ability.

High quality

1.The wind turbine is made entirely of high quality aluminum and stainless steel fittings.

2.The blade material is made of high-strength plastic with 30% carbon fiber and anti-UV anti-corrosion material, which is both beautiful and durable.

3.The surface of the wind turbine is coated with a special process that provides excellent resistance to oxidation and corrosion under any harsh conditions, as well as excellent corrosion resistance, water resistance and sand resistance.

ated power:1000W

Maximum power:1050 W

Rated voltage:24V

Start-up wind speed:2.5 m/s

Rated wind speed:12.5m/s

Working speed:3-25 m/s

Survival wind speed:40 m/s

Top net weight:29 kg

Wind wheel diameter: 950mm

Number of blades:3Easy installation

1.Take out the wind turbine, put the wind turbine on the tower and align it with the flange hole. Mount the four flat gaskets on the four bolts, then insert the bolts into the holes corresponding to the flange. Tightening the screws by hex key.

2.The three wires of the wind turbine are connected to the transmission cable, each pair of wires is not less than 30 mm, and the tape at the connection end is at 100 mm.

3.Connect the wind turbine's cable to the controller and the battery must be connected to the controller before wiring.

Wind Generator Charge Controller

Rated battery voltage: 24v

Rated wind generator capacity: 1000w

Wind generator braking voltage: 30V

Wind generator recover voltage: 27V

Quiescent power consumption: ≤15mA

IP protection level: IP67

Specifications:

Cannot connect to Ginger Check your internet connection
or reload the browserDisable in this text fieldRephraseRephrase current sentenceEdit in Ginger×Cannot connect to Ginger Check your internet connection
or reload the browserDisable in this text fieldRephraseRephrase current sentenceEdit in Ginger×