PowMr Solar Charger Controller 10~60A Battery Charger LCD Dual USB

PowMr Solar Charge Controller 10A-60A12v/24v PWM Dual USB Solar Panel Controller Charge Regulator

FEARURE:

1.Build-in industrial micro controller.

2.Big LCD display,all adjustable parameter.

3.Fully 4-stage PWM charge management.

4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.

5.Dual mosfet Reverse current protection ,low heat production.

Specifications:

• Batt voltage: 12V/24V auto
• Charge current: 10A/20A/30A/40A/50A/60A 
• Discharge current: 10A/10A/10A/20A/30A/30A
• Maximum solar input power:
• 10A:120W /12V ,240W / 24V
• 20A:240W /12V ,480W / 24V
• 30A: 360W /12V ,720W / 24V 
• 40A:520W /12V ,1040W / 24V
• 50A:650W /12V ,1300W / 24V
• 60A:780W /12V ,1560W / 24V
• Maximum solar input: 48V(24V battery) /24V(12V battery)
• Equalization: B01 sealed 14.4V B02 14.2VB03 flood 14.6V 
• Float charge: 13.7V(defaul,adjustable)
• Discharge stop: 10.7V(defaul,adjustable) 
• Discharge reconnect: 12.6V(defaul,adjustable)
• USB output: 5V/3A 
• Self-consume: 10mA
• Operating temperature: -35~+60 degree C 
• 
  
•   Packing List: 
• 1X Solar Charge Contorller 
• 1X English User Manual

1.Connect the battery to the charge regulator - plus and minus.

2.Connect the photovoltaic module to the regulator - plus and minus.

3. Connect the consumer to the charge regulator - plus and minus.

The reverse order applies when deinstalling!

An improper sequence order can damage the controller!