Impulse Sealer Machine For Polythene Bags

For short-run sealing of plastic bag

Work on Polyethylene, Polypropylene & Poly fine Compounds plastic film

Very low cost and very easy to use

Simple, robust, reliable and user-friendly

EXCELLENT for all types of plastic bags providing a wider and STRONGER seal 

Seal FOIL bags max. 0.06 mm

Create neat and finished sealing seam

Light weight and portable

Sealing time adjustable with plastic bag thickness- Place a plastic bag between sealing bars

- Set timer controller to appropriate sealing time

- Press down the sealing bar till indicate light goes out

- Release sealing bar and take away sealed bag

- Adjust timer controller in according with plastic film type and thickness to ensure neat and strong sealing effect1.The machine without power switch. The AC power cord into the outlet, according to the thickness of the material to be sealed, adjust the heating time. The plastic on the sealing surface, then press the handle, the circuit is automatically controlled heating time. When the light is off, the power is automatically disconnected. After about 1-2 seconds, release the handle on a good seal. 
2.The square when an access point appears damaged seal, it is because the heating time is too long, please dial anti-clockwise rotation to shorten the heating time. 
3.If the seal is not strong, it is because the heating time is too short. Keep the knob clockwise to extend the heating time. 
4.If a plastic bag stuck to the rubber plate, indicating the cooling time is not enough, we must extend the cooling time after the light goes out. Please release handle a little bit late. 
5.Adjust heating time later, in use should remain unchanged, in continuous use do not have to make any adjustments. 
6.The machine can always plug the AC power cord into the power outlet, do not consume power when not sealed