Skilltech TV HODER FOR 32 INCH TV,,,43 INCH TV,,,,50 INCH TV...65 INCH TV...Tilting Wall Mount Bracket 23-65 Inch + TV/ DVD Guard Power Surge Suppressor

This Skilltech tilting wall bracket offers a hassle-free way of wall-mounting your flatscreen TV safely. Built with absolute security in mind, this premium flat screen wall bracket is recommended for televisions up to 65kg, but has in fact been independently weight tested to support loads up to 70 kgs. Magnetic bubble level included for perfect positioning is guaranteed by this removable magnetic bubble level. Engineered with a low profile design, this wall mount measures just 70mm from the wall to ensure that it is almost invisible when installed. Adjustable Viewing Angle made from heavy gauge steel this wall bracket is extremely strong and has a built in tilt mechanism so that you can adjust the viewing angle from 0 - 15 degrees. Mount your stylish flat screen on the wall and accentuate your space with this tilting Wall Mount. Get the perfect angles and levels to maximize your viewing experience as you cozy up for a Netflix binge session.

• tilting wall mount
• Universal
• 23" to 65" LED/ LCD television
• Can carry 45Kgs
• Tilt -15 degrees / +15 degrees
• Profile 68mm

The FK TV/DVD guard is an overvoltage protection device rated at 13 Amps. The TV guard will disconnect if the mains go above the upper limit and re-connect automatically after the supply returning and remaining below the upper limit for the duration of the wait time.

 

PLEASE READ CAREFULLY

1. Make sure that your load does not exceed the rating of the TV guard which is 13/ 5 AMPS. If this is exceeded, the TV guard may be damaged, and the warranty will be void.2. Plug the TV guard into the mains and plug your appliance into the TV guard.3. Do not connect more than one appliance to the TV guard4. On first switching on, the red LED will indicate and there will be no output while the TV guard monitors the mains. If the mains level is acceptable, the Yellow LED is lit indicating that the TV guard is in wait mode.  At the end of the wait time, and if the supply is below the upper limit, the green LED goes on and the load is connected.5. It is recommended that the TV guard is kept switched on, and the appliance switched on and off as required, to prevent activating the time delay every time the appliance is switched on.
SPECIFICATIONSMaximum power 13/5  AmpsNominal voltage 230VOver-voltage disconnect 265VUnder-voltage disconnect 180VSpike protection 160JMains spike discharge current 6.5kAWait Time  30 secondsIdeal For TV, Video, Hi-Fi, PABX, Fax machines and all electronic equipment up to 13 Amps Weight 250gmDims 180x90x95mm

THE FRIDGE GUARD
The FK Fridge/Freezer Guard is an under-voltage protection device rated at 13 / 5Amps. The Fridge Guard will disconnect if the mains go below the lower limit and re-connect automatically after the supply returning and remaining above the lower limit for the duration of the wait time.
PLEASE READ CAREFULLY1. Make sure that your load does not exceed the rating of the Fridge Guard which is 13 AMPS. If this is exceeded, the Fridge Guard may be damaged, and the warranty will be void.2. Plug the Fridge Guard into the mains and plug your appliance into the Fridge Guard.3. Do not connect more than one appliance to the Fridge Guard.4. On first switching on, the yellow LED will indicate and there will be no output while the Fridge Guard monitors the mains. If the mains level is acceptable, the Yellow LED is lit indicating that the Fridge Guard is in wait mode. At the end of the wait time and if the supply is above the lower limit the green LED goes on and the load is connected.5. It is recommended that the Fridge Guard is kept switched on, and the appliance switched on and off as required, to prevent activating the time delay every time the appliance is switched on.6. If the red LED shows, the voltage is too low. When the voltage is acceptable, the Fridge Guard will go to yellow.
SPECIFICATIONS• Nominal Voltage  230V (or 110V)• Current Rating  5Amps• Frequency  50/60Hz• Mains Spike Response Time    less than 10ns• Mains Spike Discharge Amps  6.5kA • Spike Protection    160J• Ideal For Fridges, freezers and coolers• Weight 250gm• Dims 180x90x95mm