SURPASS HOBBY SURPASSHOBBY 35A Waterproof Brushless ESC With XT60 Plug Fo

Feature:
1. With excellent start, acceleration and linear characteristics, designed for remote‑controlled car
2. 35A ESC with XT60 plug special designed for 1/14 1/16 RC car model vehicle.
3. Battery low voltage cut off protection, overheating signal loss protection, motor blocking protection, multiple protection functions.
4. Excellent heat dissipation, strong current resistance, easy to program and compatible with pocket programming card.
5. Made of high quality plastic and alloy materials, waterproof and dustproof, durable.

Specification:
Item Type: 35A ESC
Material: Plastic + Alloy
Color: Red Black
Continuous Current: 35A
Maximum Current: 120A
Motor Type: Sensorless brushless motor
1. Highway: 28xx size or smaller engine KV < 6000KV
2. Off-road: 28xx size or smaller engine KV < 4000KV
For Lipo 3S or 9 NiMH cells:
1. Highway: KV < 4000KV 28xx size or smaller engine
2. Off-road: KV < 3000kV 28xx size or smaller engine Resistance: 0.0007 ohm
Battery: 2-3S lipid / 4-9 battery NiMH
BEC Output: 5.0V / 2A (analog mode)
Size: Approx. 40 x 32 x 20mm / 1.6 x 1.3 x 0.8in
Compatibility: Suitable for 1/14, 1/16 RC car

Instructions:
1.Connect the BEC wire to the receiver.
2.Connect the motor wire with ESC.
3.Turn on the transmitter.
4.Connect the battery pack to the ESC, then turn on E.
5.When the motor is connected to the battery, it makes a beep sound.
6.When the throttle lever is in neutral, the motor will beep again
7.ESC works.
Trouble Removal:
1.Check the connection between the battery pack and the motor if the motor does not work and no sound is emitted.
3.If the motor makes a beep sound only, check all connections: the BEC wire, the transmitter and the remote control.
5.If the car stops suddenly while in service, check motor connections and roadblocks
6.If the car is going in the opposite direction (a transmitter can be used), exchange two wires between the electric regulator and the motor..

Package List:
1 x 35A Waterproof ESC 1 x Manual
Note:
1. Please allow 1‑3mm error due to manual measurement. Thanks for your understanding.2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.3. Remove the cooling fan before using the ESC in water; Clean and dry immediately after use to prevent the connector from rusting.