Fk TV/DVD Guard + Fridge Guard + Free 4 Way Extension.

Power interruptions can cause serious issues for both homes and businesses. Unstable electricity—whether from surges, spikes, brownouts, or full utility failures—can lead to data loss, reduced productivity, and costly damage to electronic equipment. Every device connected to the mains supply is at risk of being affected by spikes, lightning, over-voltage, power cuts, and back surges.

FK offers a wide range of high-performance power protection products designed for industries and households where clean, regulated mains power is essential.

FK TV/DVD Guard – Overvoltage Protection (13 Amps)

The FK TV/DVD Guard protects your electronic devices from damaging high voltage. It automatically disconnects power when voltage rises above the safe limit and reconnects only after the supply has stabilized for the full wait-time duration.

Usage Instructions

Ensure the connected load does not exceed 13 Amps to avoid damage and voiding the warranty.

Plug the TV Guard into the mains, then plug your appliance into the Guard.

Do not connect multiple appliances at once.

On first use, the red LED will light, indicating the device is monitoring the mains. If voltage is acceptable, the yellow LED lights up—wait mode. After the delay, and if voltage is below the upper limit, the green LED turns on and power is restored.

Keep the Guard switched on and operate your appliance normally to avoid resetting the delay repeatedly.

Specifications

Maximum power: 13 Amps.

Nominal voltage: 230V.

Over-voltage disconnect: 265V.

Under-voltage disconnect: 180V.

Spike protection: 160J.

Spike discharge current: 6.5kA.

Wait time: 30 seconds.

Ideal for: TVs, Video systems, Hi-Fi, PABX, fax machines, and all electronics up to 13 Amps.

Weight: 250g.

Dimensions: 180 × 90 × 95 mm.

FK Fridge Guard – Under voltage Protection (13 Amps)

The FK Fridge/Freezer Guard protects refrigerators, freezers, and coolers from harmful low-voltage conditions. It disconnects power when voltage drops too low and reconnects only once the mains supply remains within safe limits for the full wait time.

Usage Instructions

Ensure the appliance does not exceed the 13 Amp rating to avoid damage and voiding the warranty.

Plug the Fridge Guard into the mains and connect your appliance to the Guard.

Only one appliance should be connected at a time.

On initial use, the yellow LED will light as the Guard monitors low voltage conditions. After the wait time and once voltage rises above the lower limit, the green LED will turn on, restoring power.

Keep the Guard switched on; simply operate your appliance normally to avoid repeating the delay.

If the red LED appears, voltage is too low. When it stabilizes, the Guard returns to yellow (wait mode).

Specifications

Nominal voltage: 230V (or 110V).

Current rating: 5 Amps.

Frequency: 50/60Hz.

Spike response time: <10ns.

Spike discharge capacity: 6.5kA.

Spike protection: 160J.

Ideal for: Fridges, freezers, coolers.

Weight: 250g.

Dimensions: 180 × 90 × 95 mm.