UNIT UNI-T UT25CL Cable Detector In The Wall Electric Scanner

UT25CL Handheld cable locator can be used to detect the path of low-voltage cables buried in ground (such as cabling inside wall); test and diagnose opens, shorts and other problems occurring at cabling; and detect if the tested cable is energized. The transmitter can display corresponding voltages (voltage of energized cable: ≥8V), and the receiver can simultaneously display the signal strength, transmitter code, transmitter level, low battery, etc. UT25CL has multiple advantages including accurate measurement, easy operation, visualized display, and more, making it an ideal tool for low-voltage cabling engineering, engineering and maintenance of metal conductors, etc.



Features:

Multiple Coding Signals Available: Transmitter has eight encoding signals to choose from; Multiple transmitters can be tested simultaneously using different codes, and one receiver can support up to 8 transmitters for signal reception.

Signal Strength Adjustable: Emiter: Adjustable signal strength in three levels, helps to avoid false signals causing misreading and prevents strong signals from covering too large an area and causing receiver oversaturation.

Multi Level Sensitivity Adjustable: Receiver can be set to automatic or manual detection mode, sensitivity can be adjusted in manual mode.

Voltage Measurement and ELV Function (Emitter only): Voltage measurement function, range 8-480V AC/ (50/60Hz), and can recognize the polarity of voltage. The ELV function can light up the ELV indicator light when the port is connected to a voltage greater than 25V without turning on the device.

Non Contact NCV Function (Receiver Only): The NCV (non-contact electrical verification) mode is used to verity whether the cable is live or to track the cable without using the transmitter.

Flashlight and Backlight Function (Receiver only): Turning on the flashlight and backlight during use in the dark or dark environment can facilitate line finding.



Specifications:

Model: UT25CL

Material: ABS

Transmitter

Working Frequency: 33kHz

Identification Range of External Voltage: 8~480V

Identification Frequency of External Voltage: /AC: 50-60Hz

Measurement Accuracy of External Voltage: 2.5%±3deg

Strength of External Overvoltage: 480V /AC

Overvoltage Rating: CAT III 480V

Pollution Degree: 2

Display: Segmented LCD (TN translucent)

Battery: 6 * 1.5V AA (LR06) (Not included)

Consumption: 165mA (including backlight, output short circuit, Ill, CODE5)

Fuse: F0.6A 600V

Operating Temperature: 0 ~40℃; Max. 80%RH (Non-condensing)

Storage Temperature: -20~60C; Max. 80%RH (Non-condensing)

Operating Altitude: ≤2000m

Transmitter Size: 189 * 96 * 48mm / 7.44 * 3.78 * 1.89in

Transmitter Weight: 534g / 1.17lb

Drop Proof: 1m

Button Life: 10000 times

Backlight: Supported (white)

CODE (Code value): 0,1,2,3,4,5,6 and 7.

Default code: 5

Level of Signal Strength: 1, 2 and 3

Default level: 3

Single Pole Testing: Supported (Support testing in energized condition; Maximum 480V)

Dual Pole Testing: Supported (Support testing in energized condition; Maximum 480V)

ELV Indicator Light:

1. Without batteries: If external voltage applied is >25V, the ELV LED emits weak light and its brightness increases as voltage rises (light up constantly), otherwise, the ELV LED emits weak light or lights off.

2. UT25CL-T is in -on state with batteries installed: the ELV LED lights off

3. UT25CL-T is in -off state with batteries installed: If external voltage applied is >25V, the ELV LED emits weak light and its brightness increases as voltage rises (light up constantly), otherwise, the ELV LED emits weak light or lights off.

Certification: CE Certified

EMC: EN IEC 61326-1

LVD: EN 61010-1

EN IEC 61010-2-033

Rohs

Receiver

Working Frequency: 33kHz

Locating Depth: Related to the medium and the method used

Tracking Mode for Single Pole: About 0~2.5m (Use separate loop wire for 2.5m)

Tracking Mode for Dual Poles: About 0~0.5m

Grid Voltage Identification: About 0~0.4m

NCV: Voltage identification range: 80~1000V, 50Hz/60Hz (Approach the measured cable)

Display: Segmented LCD (TN translucent)

Battery: 6 * 1.5V AAA (LR03) (Not included)

Consumption: About 30mA (Excluding backlight and flashlight)

About 65mA (Excluding backlight)

Maximum 95mA (including backlight)

Operating Temperature: 0~40C; Max. 80%RH (Non-condensing)

Storage Temperature: -20~60℃; Max. 80%RH (Non-condensing)

Operating Altitude: ≤2000m

Receiver Size: 226 * 68 * 38mm / 8.89 * 2.67 * 1.49in

Receiver Weight: 361g / 0.79lb

Button Life: 10000 times

Indication for Running Out of (For transmitter): Supported

Backlight: Supported

Flashlight: Supported

CODE (code value): 0, 1, 2, 3, 4, 5, 6 and 7

Levels of Signal Strength of Transmitter: Level 1, Level 2, and Level 3

Reception Sensitivity (Manual Adjustment): Including 9 levels

Index Range of Signal Strength: 0~999

Analog Bar Range of Signal Strength: 0~43

Receive Multiple Transmission Signals: Supported (A receiver can receive signals generated by maximum 8 transmitters at the same time)

Certification: CE Certified

EMC: ENIEC 61326-1

LVD: EN 61010-1

EN IEC 61010-2-033

RoHS

Indoor Use: Supported

Package Weight: 2313g / 5.09lb

Package Size: 35 * 26 * 11cm / 13.77 * 10.24 * 4.33in



Package List:

1 * Transmitter

1 * Receiver

2 * Alligator Clips (Red + Black)

2 * Dual Inline Test Leads (Red + Black)

2 * Connected Probe (Red + Black)

1 * AC Polarity Plug Cord

1 * Auxiliary Grounding Spike

1 * Tool Bag

1 * User Manual (English)