USB LCD 520W Solar Panel Ba*tery USB Regulator Charge Controller Home Outdoor

20A 12V/24V LCD Display PWM Solar Panel Charge ControllerLi-ion Lead Acid Bat tery Compatible w USB Backlight LCD Display KEY Point 1: Both Bat tery Lead Acid Bat tery The default charging mode is bat tery, you can shift it to the Lead acid bat tery. KEY Point 2: Data Recording: New-developed CPU board is equipped with data recording and storage functions.The voltage and time of each charge will be recorded automatically, which will get ready for a automatic identification of the connection. KEY Point 3: Extra 12V/24V Output Convenient for electric device with 12V or 24V input, like fans, lights, etc.. Specifications: Model:KYZ-20A Charge-Control Mode: PWM Rated Voltage:12/24V Auto-Adaptive Charge Current:20A Discharge Current:10.7A Solar Input:50V Solar :260W(12V),520W(24V) Standby Current: 10mA USB Ouput: 5V/2A Output: 12V Operating Temperature: -35℃~60℃ Size: 133x70x35mm Weight: 140G For Using Bat tery (Double in 24V System) Equalization (LIt): 12.8V Float: 12.0V (defaults, Adjustable range11.5-12.8V) Undervoltage Protection: 10.7V (defaults, Adjustable range9.0-11.0V) Disstarge Reconnect: 11.6V (defaults, Adjustable range11.0-11.7V) For Using Lead acid bat ery Equalization (bAt): 14.4V Float: 13.7V (defaults, Adjustable range13-15V) Undervoltage Protection: 10.7V (defaults, Adjustable range9.0-11.5V) Disstarge Reconnect: 12.6V (defaults ,Adjustable range11.5-13V) Feature Build-in industrial micro controller. Big LCD display,all adjustable . Fully 3-stage PWM charge management. Build-in short-circuit protection,open-circuit protection, protection,over-load protection. Dual mosfet current protection,low heat production. Improvedterminal position design, prevents the backrush of current from burning out the controller, and also protects the bat tery, making the charging process safer. The screen comes with backlightwhich willlight up when you any of the buttons, making it easier to operate at night or in low-light locations. Package Included: 1x 20A PWM Solar Charge Controller 1x Screwdriver 1x Manual(in English Chinese) ConnectionSteps (VERY INPORTANT): 1.Connect the bat tery to the charge regulator-plus and minus. 2.Connect the photovoltaic module to the regulator-plus and minus. 3.Connect the consumer to the charge regulator-plus and minus. NOTICE: 1.Please connect each unit according to the steps above strictly. 2.Make sure the bat tery have enough voltage for a right bat tery type identifying. 3. for using bat tery will be double when in 24V system. 4. for photovoltaic panel use.
















a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a