SPECIFICATION OUTER SIZE: L110*W100*H165MM CAPACITY: 700ml DROP VOLUME:
0.5-1 ml WEIGHT: 840g MATERIAL: ABS PS BATTERY: 4X1.5V "AA" FEATURES
&INSTALLATION NOTES
1. Do not install the dispenser above the Mirror
surface or above flowing water. 2. Do not install the dispenser less
than 20 inch (50cm)height beneath the table. 3. The sensor is at the
base of dispenser.The effect range is from 0-10cm underneath the sensor.
4. The product is design for indoor use only. Direct sunlight or exposed
locations can destroy the infrared sensor of the product.5. Low
voltage indicator when you find LED light twinkle continually while
dispenser on standby mode,battery replace is necessary. 6. This product
doesn't have waterproof function, please place product far from
dampness. 7. The dispenser is suitable for sanitizer gel and liquid
soap.
INSTALLATION AND USE 1. Use the mounting plate as a template to
mark the Position. 2. Drill two 5mm holes and insert plugs into the
holes.
3. Fasten the mounting plate on the wall with the provided
screws.
4. Slide the dispenser in the mounting plate 5. Insert 4pcs
batteries into battery compartment with proper polarity as shown on
compartment. (Alkaline battery is recommended). 6. Open the cover and
fill in the liquid to the container 7.Put your hand under the sensor
0-10cm,and let the dispenser to start working for continuous until
liquid soap come out from nozzle (When you use dispenser at first time,
there was some air in the pump,you need work dispenser several times
until liquid soap drop down.) 8.Power On/Off Usage 1st time press, tum
on, suitable for liquid soap. 2nd time press, turn on, suitable for gel
soap. 3rd time press, shut down the machine. The gear can be adjusted
according to the soap concentration. Suitable for all concentrations of
hand sanitizer, alcohol, disinfectant.