915 Generation 6 X Adjustable LM2596S DC-DC Down Converter,36 V,24 V,12 V t

Product parameters: input voltage is 4.0 V - 40 V, output voltage is 1.25 V - 37 V, output current is 2 A (normal and stable) and maximum 3 A, conversion efficiency 92% (highest), output ripple under 30 mV, switching frequency 150 kHz, operation temperature is -45 to 85 degrees Celsius.
Easy to use: the voltmeter can be turned off, and the switch can be turned off by holding the switch than 1 second and less than 4 seconds. Once the voltmeter is switched off, simply press the switch to turn on the voltmeter.
EASY TO USE:With terminal block, no soldering iron is convenient to use and maintain the wire connection (the input voltage must be higher than the voltage output 1V or more).
Output current: the maximum output current can be up to 3A, the recommended working current is . 2A, more than 2A plus heat sink
Beautiful design: with an internal oscillation frequency of 150 kHz, low power consumption and high efficiency; if the output voltage cannot be adjusted and always matches the input voltage, turn the potentiometer more than 10 revolutions counterclockwise, then adjust the voltage with the module normally. This is because the standard output voltage when leaving the from the . 20 V. Material:Plastic + Metal
colour:Blue Package Contents:
6 x LM2596s Converter DC to DC
Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.