915 Generation RFD900A 915Mhz 3DR Radio Telemetry Modem Module UAV 40KM

Detailed Information About The Product:

Features: Long range Greater than 40km depending on antennas and GCS setup x 80km demonstrated by Edge Research labs on a balloon !, 57km in India, on Dipoles. 2 x RP-SMA RF connectors, diversity switched. 1 Watt (+30dBm) transmit power. Transmit low pass filter. Greater than 20dB Low noise amplifier, high IP3. RX SAW filter. All I/O ESD protected and filtered. Re implemented SiK and Multipoint SiK firmware, field upgradeable, easy to configure.
Compatible with 3DR / Hope-RF radio modules. Interfaces: RF : 2 x RP-SMA connectors. Serial: Logic level TTL (+3.3v) Power: +5v, ~800mA max peak (at maximum transmit power) GPIO: 6 General purpose IO (Digital, ADC, PWM capable). Software / GCS Support: The software solution is an open source development called "SiK". It has been re implemented to suit the new processor architecture available on the 32bit ARM processor core.
A boot loader and interface is available for further development and field upgrade of the modem firmware via the serial port. Most parameters are configurable via AT commands, Eg. baud rate (air/uart), frequency band, power levels. Integrated support for configuring the RFD900 radios is supported by APM Planner. The default settings are at 57600 baud, N, 8, 1, and 64k air data rate.
Software features include: Frequency hopping spread spectrum (FHSS) Transparent serial link. Point to Point, or Multipoint networking. Configuration by simple AT commands for local radio, RT commands for remote radio. User configurable serial data rates and air datarates. Error correction routines, Mavlink protocol framing (user selectable) Mavlink radio status reporting (Local RSSI, Remote RSSI, Local Noise, Remote Noise)
Automatic antenna diversity switching on a packet basis in realtime. Automatic duty cycle throttling based on radio temperature to avoid overheating. Important note: please keep a distanceof more than 3m when the two data transmission modules are powered on, otherwise it may cause abnormal frequency matching of data transmission and seriously burn the high-frequency circuit.

main features
RDF900A is a wireless data transmission module with small volume and excellent performance. The main features are:
1. Regardless of transceiver design, each module is integrated with USB serial port chip, and USB and UART interfaces are automatically switched. USB takes precedence
2. Operating frequency range: 902-928 MHz, ISM band
3. The transmitting circuit is designed with a low-noise amplifier greater than 20DB, and a low-pass filter unit is added
4. The transmission power is adjustable, Maximum 1W transmit power
5. High sensitivity LNA and SAW circuits in front of receiving circuit
6. The outdoor communication distance can reach 40 km or more in a straight line (depending on antenna performance and communication rate requirements)
7. The air data rate can reach up to 250Kbps
8. Dual antenna interface, supporting antenna diversity and differentiated antenna configuration
9. Support AT command configuration of local radio station and RT command configuration of remote radio station
10. It has module temperature monitoring function and automatically adjusts the duty cycle according to the temperature to avoid overheating
11. Working temperature - 40 to + 85 ℃
12. The size is 33mm x 53mm x 9.5mm
13. Weight: 23g
Material: metal+plastic
Color: as shown

Package Contents:
1 x RFD900A 915Mhz 3DR Radio Telemetry Modem Module Kit

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.

About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.

About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.

About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !