Green Leaf Cool Skin Sticker For PS3 Controller Playstation-

I am an Chinese seller,providing customers with high-quality and low-cost products.

The types of products we sell include Home & Kitchen,Health & Beauty,Fashion Clothing,Electronics,Watches & Jewelry,and so on.

We keep up with the most popular fashion trends. If you like our products, please follow us and become our followers and fans.

Sincerely at your service .Please feel free to contact us if you have any questions.
Descriptions:
Comfortable to feel, convenient to carry.
Protect your console from dusts, scratches, dirts and damage.
Easy access to all function keys without removing the case.

Type: Skin Sticker
Media: Video Game
Install
1) Clean your controller surface as thoroughly as possible. Use rubbing alcohol on a lint-free
cloth to remove any grease or other contaminates. Most issues of non-sticking are due to
some type of oil or grease that is on the unit prior to installation.
2) Peel one piece of the Skin from the paper liner. NOT to let the adhesive side touch anything.
3) Determine the placement, apply the Skin to the surface using your fingers or the side of your
thumb, starting from one corner and working your way across the surface.
4) If a decal sticker piece is not going on straight, you can gently lift the sticker back up. Do not stretch it from its original size.
5) If installed slowly and carefully, there should be NO air bubbles left under the sticker skin.
Any air that may become trapped under the sticker skin during installation will go away in time. You can also use a pin to break it.
6) During the cold weather or for a better result, apply hot air to the decal surface to activate chemical agent after putting the sticker
skin on your Controller. Especially heat up the edge surface. Allow at least 3 hours for cool down before touching the decal sticker skin.
Using a hair dryer or hot air gun is fine.

Package includes:
1 x Skin Sticker