1200M WiFi Repeater Long Range Smart OLED 5Ghz Wireless Wifi Extender Wi-Fi Amplifier WifiAntenna Wifi Repeator

1200M WiFi Repeater Long Range smart OLED 5Ghz Wireless Wifi Extender Wi-Fi Amplifier Wifi Signal Booster Antenna Wifi Repeator




Product Description:


NF-RE523 is a gigabit dual-band repeater with OLED smart screen. Innovative OLED compared with the traditional repeater, the user's setup and use are more simple and intuitive. Xiaobai can also get started easily, and he knows the working of his repeater like the back of his hand. It is suitable for scenarios with incomplete routing coverage of houses such as large flats, villas, duplex buildings, and corporate offices.




Features:

1.Wi-Fi expansion, eliminating dead spots of wireless signals;

2.OLED screen display, working status - - clear at a glance, the device is easier to use and easier to use;

3.1200Mbps dual-band, stronger anti-interference, high speed, more compatible with gigabit home routing;

4.4 antenna signal enhancement, signal coverage and wall penetration are significantly improved;

5.The antenna can be rotated flexibly, and the user can adjust the angle of the antenna to adjust the signal transmission and reception;

6.Support WiFi to wired, can be connected to TV, computer, etc. to connect with wired and stable work;

7.Scientific heat dissipation design, the device supports 24h stable work without disconnection, avoiding overheating and aging of components;
8.ApplicationCF-WR761AC is suitable for scenarios such as duplex buildings, large flats, villas, and offices where large-area routers arE not fully covered.





Specification:

1.Brand: NEWFAST
2.Model: NF-RE523
3.Colour: Black ?EU/US/UK Plug
4.Operating mode ：Repeater / Router / AP / Bridge
5.Chipset:MT7628DAN + MT7613BEN,RAM: 64MB; Flash: 8MB;
6.Antenna: 4*3dBi high-gain Omnidirectional antenna
7.Wireless Standard：IEEE802.11a/b/g/n/ac standard
8.RF Parameters:Transmit Power: 126mW(21dBm)
9.Acceptance Sensitivity: -96dBm
10.Working Frequency: 2.412-2.472GHz : 5. 180-5.825GHz
11.Transmission Rate:2.4GHz : 300Mbps 5.8GHz: 867Mbps
12.Physical interface : 1*10/100Mbps LAN/WAN RJ45 Ethernet port , 1*RESET/WPS Button ；
13.Power :?100-240V,50/60Hz
14.Channel bandwidth ：20/40/80 MHz Auto
15.Safety features：WPA-PSK/WPA2-PSK WPA/WPA2
16.Case:ABS Material + plastic shell
?
Package included:
1* 1200Mbps OLED Wifi Repeater

1* Network Cable

1* Quick Install Guide



Note:About the signal,The repeater should be placed between the router and the distance to be transmitted, and it must be ensured that the repeater can receive the full signal before it can relay the signal well.


High performance Dual Band wifi up to 1200Mbps

Universal compatiblity with all the latest router, access point , wifi enable devices, and internet service providers.Newfast Smart Oled Screen Display wifi repeater

the 1200Mbps wifi extender support 99% Wifi internet box (802.11ac/b/g/n/a)

The latest smart chips

Stronger anti-interference, high speed ,perfec matching with your home routing

Maximum 20dbm transmitting power and 4*3dbi antennas easily throuht the wall ,powerful 4 high gain external antennas 180 rotatable

No wifi Dead zone

Booster your existing router's wifi coverage experience a better ,wider wifi coverage.

1200Mbps Dual Band Wifi Repeater Faster,Stable and efficient

2.4Ghz for long Distance Extension ? 5.8Ghz for high speed performance?Wifi repeater can connect to various wired devices ?The latest smart chips5 modes & Multiple Functions ?Home Repeater mode: Bridge mode: Extend wifi signal

Hotel: AP Mode Switch wired network to wireless

Office/Cafe : Router mode : Regular router for home use

Client mode : Turn wireless signal to wired network?Encryption Network Security ： WPA-PSK/WPA2-PSK WPA/WPA2?Multiple scenario application

Applying the extendr to these large areas can effectively solve the problem of signal instability

Set up guide:

Just?three?steps?with?a?phone/computer/Ipad?.
The?default?working?mode?is?repeater?mode.
1.Using?Phone?to?connect?ssid?,like?NEWFAST-XXX
2.Input?192.168.10.1?in?the?browser,click?repeater?mode?in?Gui?Page.

3.?Choose?the?wifi?signal?which?need?to?be?extended,?input?password?and?clieck?set?up?,?waiting?for?5?seconds,?if?the?light?is?blue,?then?the?setting?is?successful.

FAQ
Q1: Can't connect to internet after finished setting ?
A1: Please check whether you enter the same password as your router, and check is there any special characters in it, such as *&^%$#@!. If yes, please change your router password. Repeater can not identify special characters.
Q2: How to reset the repeater ?
A2: Please long press the reset button for 10 seconds under powered.
Q3: What should I do if I cannot access the Repeater' s web managementpage?
A3:
①Make sure your computer is connected to the extended network.
② Make sure your computer is set to obtain an IP address automatically.
③ If the Repeater has connected to the router,you should go to your router' sDHCP client list to obtain the Repeater' s current IP address.
④ Reset the Repeater.
Q4: Why does the wireless transmission rate speed down,when the wirelesssigna! is stronger after repeated by the Repeater?
A4:Repeater has to process one-way communication between your root Wireless
In compliance with the wireless transmission protocol,all the Repeater devicesare set to work in half-duplex instead of full-duplex mode.In other words,therouter(or AP) and the terminal clients; so the transmission time will be double-increased,while the speed will be decreased.Recommends that youconnect to the extender when your home network connection is poor ,or whenyou want a larger wireless coverage to eliminate' dead zones''
Q5: Why the devices connected to the Repeater cannot get an IP addressfrom the Repeater and cannot access the Internet?
A5:
①Maybe you enabled a wireless for MAC filter ,wireless access control,or accesscontrol list(ACL) on your router. To solve this problem,please log into yourrouter and disable the for MAC filter,wireless access control or ACL.
②Maybe the Repeater has not been successfully connected to your router,please reset the Repeater and Reconfiguration.
③Maybe the IP address of the router is occupied or the wireless device connected by the router has reached the limit. please reboot your router,then reset the Repeater and Reconfiquration.






















">