2 Port POE Extender 100Mbps with IEEE 802.3Af Standard for N

1.Comply with IEEE 802. over Ethernet (10/100M Supported)Extender the range of PoE an additional 100 meters
2.Automatically detects and protects PoE equipment from being damaged by incorrect installation
3.Plug-and Play no configuration required
4.2-Port PoE extender can forward both Ethernet and PoE for 1 terminal equipment via Cat5 ,Cat5e,Cat6,Cat6e,UTP cable.
5.2-Port PoE Extender has 3 10/100M Lan ports, among them, one for input, the other two for output. Comply with 6.10/100BASE-TX,IEEE 802.3 -PoE. input for one port is 13W. output for four port is 12.2W.
Used with , IP camera, IP telephone and the other network equipment in the situation of the lack of line or far from the outlets
Installed at hotels, schools, buildings, villages, etc.
POE input: 1 RJ45 port (DC 44-57V, 802.3at)
POE output: 2 RJ45 port (48V, 802.3af)
POE Pin Output: 1/2(+), 3/6(-); MAX 15W
Network Medium: Cat5 or better UTP cables (less than 120m)
Repeater Mode: Store and forward Address Table: 2K
Packet Buffer Memory: 48 Byte
Switching Capacity: 1.0Gbps
PoE Standard: IEEE 802.3af
Input : 13 Watts
Output : 12.2 Watts Supply Type: 1/2+,3/6-,Mode A, End-Span
Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af- over Ethernet;
Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU, Low Voltage Directive 2014/35/EU,EMC Directive 2004/108/;
Working temperature: -10°c to 45°c
Colour:black
Material:Metal
Size:83.5 x 53 x 21.5mm Package Contents:
1 x POE Extender Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.