300M WiFi Repeater WirelessWifi Range Extender Wi-Fi Long Signal Stronger Amplifier 2.4G WiFi Repiter

Note：

1.Not with RJ45 Network Cable；
2.Only with US and EU Plug, please confirm the plug specifications；
3.Only Support 2.4G WiFi，If your router is WiFi multi-band, please turn off this function And turn on 2.4GWiFi

FAQ：
Q1. Can't connect to internet after finished setting ?
A1. Please check whether you enter the same password as your router, and check is there any special characters in it, such as ~!@#$%^&*(). If yes, please change your router password. Repeater can not identify special characters.
If everything is ok , just Restart the router（home router not the repeater）

Q2.Can not find the WiFi of repeater before setting？
A2.Reset.

Q3. How to reset the repeater ?
A3. Please long press the reset button for 10 seconds under powered.

Product Features:
1. 2.4GHz 300Mbps high transmission speed improves wireless coverage in all WLAN networks.
2. Access to the Internet for computers located on the edge or outside of the range of your access point.
3. Provides one 10/100Mbps Auto-Negotiation Ethernet LAN ports.
4. Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b standards.
5. Provides up to 300Mbps transmission rates.
6. Support 2.4 GHz WLAN networks.
7. Maximum WLAN security with WPA2, WPA and WEP (128/64).
8. Software wizard for simple setup.
9. Support Wireless Repeater Mode and Standard AP Mode.
10. Integrated Dual-Antennas for higher stability.
11. Correct the language and the stablility of signal, revise default reboot.
12. Former version need reticle to reboot,but now do not need.
13. Smart LED status indicator helps you to find the best location to place the range extender.
14. Outdoors 300Mbps, Indoor 100Mbps (According to the Actual Environment Change).

Specifications:

Port：1x LAN Port
Color: Black / White
Product Type: WIFI Repeater
Plug Type: EU / US Plug
Voltage: AC 110-240V
Frequency Range: 2.41-2.48GHz

System Requirements:
1. WLAn access point/client according to IEEE 802.11n/g/b.
2. The WLAN client must support at least WPA encryption standard.
3. WLAN access point and the WLAN client with automatic IP address assignment(DHCP).
4. Forwarding of IPv4-bassed protocols/Address Resolution Protocol.
5. The network name (SSID) of the WLAN access point must be set to *visible*

Package Content:
1 x Wireless Wifi Repeater (US/EU Plug)
1 x Installation Manual（English）