400wdc-Dc High Power Constant Voltage Constant Current Boost Power Module

[Module Name] 400W Boost Constant Current Module

[Module Properties]: Non-Isolated Boost Module (Boost)

[Input Voltage]: DC8.5V-50V

[Input Current]: If 15A (Max) Exceeds 8A, Please Strengthen Heat Dissipation

[Static Work Current]: 10ma (When 12V L 20V, the Higher the Output Voltage, the Higher the Static Current Will Increase)

[Output Voltage]: 10-60V Continuously Adjustable (the Default Output Is 19V Shipped. If You Need Other Voltage, Please Explain to the Shopkeeper.)

12-80V Fixed Output (for Batch Customers)

[Output Current]: 12a Max Exceeds 7a Please Strengthen Heat Dissipation (Related to Input and Output Differential Pressure, the Larger the Differential Pressure, the Smaller the Output Current)

[Constant Current Range]: 0.2-12a

[Output Power]: = Input Voltage * 10, for Example, Input 12V * = 60W, Input 24V * = 120W,

Enter 36V * = 180W, Enter 48V * = 240W,

[Operating Temperature]:-40~85 Degrees (Please Strengthen Heat Dissipation When the Ambient Temperature Is Too High)

[Operating Frequency]: 150KHz

[Conversion Efficiency]: 96% (Efficiency Is Related to Input, Output Voltage, Current, and Differential Pressure)

[Overcurrent Protection]: Yes (Input Exceeds 1, the Output Voltage Is Automatically Reduced, and There Is a Certain Range Error.)

[Input Reverse Connection Protection]: None, (If You Need More Reverse Connection Current, Please String Diode into the Input)

[Installation Method]: 4 2.5mm Screw Holes

[Wiring Method]: Wiring Output

[Module Size]: Length 67mm Width 48mm Height 28mm

[Module Piece Weight]: 60G

I. Output Voltage/Current Regulation Method:

1. Adjust the "CV-ADJ" Potentiometer and Set the Output Voltage to the Voltage Value You Need According to Your Battery Or LED. For Example, 10 Strings of LED Voltage Adjustment 37V. (The Reverse Clock Voltage Is Increased, and the Clockwise Voltage Is Reduced)

2. Adjust the "CC-ADJ" Potentiometer for about 30 Turns Counterclockwise, Set the Output Current to, Connect the Led, and Adjust the Rv2 Potentiometer to the Current You Need. If the Battery Is Used for Charging, after the Battery Is Discharged, It Will Be Connected to the Output, and the Rv2 Will Be Adjusted to the Current You Need. (When Charging, You Must Use the Battery That Has Been Discharged to Adjust It Accurately, because the More Power the Battery Has Left, the Smaller the Charging Current.) (Reverse Clock Current Is Reduced, Clockwise Current Is Increased)

Please Do Not Adjust the Current by Short Circuit. the Circuit Structure of Boost Module Cannot Be Adjusted by Short Circuit.

Application Scope:

1. DIY a Regulated Power Supply, the Input 12V Is OK, the Output Can Be 12-50V Adjustable.

2. to Supply Power to Your Electronic Equipment, You Can Set the Output Value According to Your System Voltage.

3. as a Vehicle-Mounted Power Supply, Power Supply for Your Laptop, Pda Or Various Digital Products.

4. DIY a High-Power Laptop Mobile Power: with a Large Capacity of 12V Lithium Battery Pack, Your Notebook Can Be Lit Wherever You Go.

5. Solar Panel Voltage Stabilization.

6. Charge Batteries, Lithium Batteries, Etc.

7. Drive High-Power LED Lights.