Adapter Card 2242 SATA M.2 SSD To 1.8 Inches CE ZIF Interface SS

Detailed Information About The Product:

The purpose of this adapter card is to rep the 1.8-inch CE interface hard drive with a cheap SATA M.2 hard drive. It does not support NVMe protocol M.2 SSD but supports most 2242 specification SATA protocol M.2 SSD!
This product requires a chip to change the shape of the hard disk interface. The chip model is JMB20330;
Product volume is approximately: length*width*thickness=53.5 mm x 30 mm x 5 mm.
This product adopts an ultra-thin CE interface with front and back contacts and supports the use of 0.15mm thick cables but the interface insertion point is 1 mm wider than the cables.2242 SATA M.2 SSD to 1.8-inch CE ZIF interface SSD adapter card
Note:Different Batches May Have Differences In Product Appearance Color And Printed Characters Which Will Not Affect The Use

Model: SATA to CE thin model
Type: adapter card
Key points to note before purchasing:
1. Please make sure that the hard disk of your machine is a 1.8-inch CE interface with PATA protocol 40PIN CE interface is also called ZIF interface!
2. Make sure your M.2 hard drive is SATA protocol and the specification is 2242. Another point is that Apple devices are not compatible with all M.2 hard drives. It is recommended to use hard drive models that have been verified by others.
3. It is recommended to use low-power SSD as much as possible because the mechanical audio power used by your device is very low so the power supply part of your machine designed for your hard disk can not provide a large current. Generally 1A~1.5A is enough. To the maximum extent if you use a high-power SSD it will definitely increase the power supply load of the device. If the power supply part of the machine cannot meet the needs of your M.2 SSD it will cause inexplicable fai such as non-recognition repeated restarts and blue screens of crashes.
4. Because the width of the card holder interface of this product is 1 mm wider than the width of the cable it needs to be aligned with the center position to insert it correctly.
Colour:as described
Material:PCB

Package Contents:
1 x Adapter Card
1 x Screw
1 x Stud

Only the above package content other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best pricewe support Wholesale/Drop Shipping Order
1. For Drop Shipping order please remark"dropshipping order" we will prioritize it.
2. For Wholesale/Drop Shipping orders if you have any ideas about the price or packageplease contact us in advancewe will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the orderplease contact us in advance we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your packageplease don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !