Desktop Computer Motherboard LGA 1155 USB3.0 SATA Mainboard

Important reminder:
The color of the slot bottom plate may be different for each batch. The product is continuously optimized and upgraded, and does not affect the normal performance of the product performance and function.

Features:
1. USB3.0 high-speed interface: front and rear dual-position, dual USB3.0 interface, high transmission rate.
2. DDR3 memory: Fully compatible with DDR3 desktop memory 1066/1333/1600/1866.
3. SATA3.0 high-speed hard disk interface: support SSD solid state drive high-speed transmission.
4. Nuclear High Definition Multimedia Interface HD graphics: HD high-performance graphics card, support VGA + High Definition Multimedia Interface dual output.
5. Professional design, your best choice.

Specification:
Motherboard chip:
Integrated sound card / network card
Main chipset: for Intel B75 series
Audio chip: integrated 6-channel audio chip
NIC chip: integrated RTL8105E
Processor

Specifications:
CPU socket: LGA 1155
CPU type: i3 i5 and i7 series
Memory

Specifications:
Memory type: DDR3 1066/1333/1600MHz desktop memory
Memory slot: 2*DDR3 DIMM
Maximum memory support 8G*2
Expansion slot:
1*PCI-Ex16 graphics card slot
1*
PCI-Ex1 slot
2*USB2.0 slot (1 set)
1*
M.2 ports NVME/NGFF hard drives (with PCIE/SATA jumper)
2*SATA2
.0 interface 1*SATA3.0 interface
I/O interface:
USB universal interface
1*RJ45 network interface
2*USB2.0 interface
2*USB3.0 interface
Audio port
Other parameters:
Power connector 4 pin, a 24-pin power connector
Power supply mode 3 items
Size: Approx. 19 x 17 x 4cm / 7.5 x 6.7 x 1.6in
Weight: approx. 542g

Package List:
1 x Motherboard
1 x SATA cable
1 x Baffle
.Note:1.It is recommended that professionals perform installation.2. When there is no display, no boot, no picture, no network card, no sound card, etc. after the normal installation of the motherboard, it is recommended that the customer restore the factory settings (see the steps for specific methods) or find an eraser to wipe the golden finger of the memory CPU graphics card (Motherboard contact part) to improve the contact environment.
3. Please note that the new type and old type of this product will be sent Ran-domly, and make sure you will not mind before ordering.
Factory Reset Steps:
1. Shut down
2. Unplug the power cord connected to the motherboard, 24 wires and 4 wires must be removed
3. Remove the battery
4. Reverse the battery
5. Wait 10 seconds
6. Install the battery normally
7. Connect power
8. Boot