Digital Servo FT5330M 35KG 25T Arm For 1/8 1/10 RC Car

Detailed Information About The Product:

Optimized center distance, double ball bearing design, longer life. Automatic protection after 8 seconds of stalling. 70C overheat protection
With 8-second overload protection and 70℃ overheat protection After the servo is stalled, the output torque exceeds the overload torque and continues for more than 8 seconds, and then automatically outputs the protection torque. (Overload torque, protection time, protection torque support modification)
With waterproof characteristics
Aluminum middle shell design for better heat dissipation
Position sensor can rotate 180°

Storage Temperature Range -30℃~80℃
Operating Temperature Range: -20℃~60℃
Gear type: Steel
Limit angle: NO limit
Bearing: Ball bearings
Horn gear spline: 25T/5.9mm
Horn type: Plastic,POM
Case: PA+Alumi num
Connector wire: 30CM
Motor: Core Motor
Operating Voltage Range: 6V-7.4V
Idle current (at stopped): 6MA@7.4V
No load speed: 0. 192sec/60°@7.4V
Runnig current(at no load): 180mA@7.4V
Peak stall torque: 35.5kg.cm@7.4V
Rated torque: 11.8kg.cm@7.4V
Stall current: 3.9A@7.4V
Command si gnal: Pulse width modification
Amplifier type: Digitalcompara tor
Pulse width range: 500~2500usec
Stop position: 1500 sec
Running degree: 220° Continuous Rotation
Dead band width: less than equal 4 μsec
Rotating direction: Counterclockwi se (1 500→2000μ sec)
Electronic Protection:Stall 8sec
Temperature protection: Greater than 70℃
Note: Different batches may have different product printing words, which will not affect the use
Colour:Black & Blue
Material:PA+Aluminum

Package Contents:
1x Servo
1 Set x Accessories

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowederror is +/- 1-3cm.