EDUP 2.4Ghz 4W 802.11n WifiSignal Amplifier WiFi Repeater Extender Wireless Wifi Power Booster Long-Range

Notes:

Your device must be SMA antenna?detachable?Connector when used it , for example SMA detachable antenna router. Please comfirm that you device output power range is between 3dBm?and 20dBm,only that the wifi signal booster could work well

Features:

Low-noise receive gain

Signal activity LED indicates

High Gain, High Value, High Performance

Maximum output power of 5000mW by the Booster

Plug-and-play, Easy installation, no driver needed

Ideal for increase the 2400-2500Mhz frequency devices

Increase the effective range and coverage area of your Wi-Fi network

Simply attach the booster in between the standard antenna on a wireless router or wireless access point and watch your range grow

The amplified wireless signal may even penetrate complex environments with many walls and obstacles

Ideal for use with 2.4GHz Wireless LANs, Support 802.11b, 802.11g, 802.11n (2.4Ghz mode only)

Specification:

Operation Range: 2400-2500 MHz.

Operation Mode: Bi-directional, half-duplex, Auto-Switching via carrier sensing.

Frequency Response: ± 1dB over operation range.

Input Power: 3dBm (Min.)-20dBm (Max.).

Output Power: 4000mW?nominal

Transmit Gain: 12-14dBm nominal.

Receiver Gain: 9-11dBm.

Receive Noise Figure: 3.0dBm nominal.

Operating Temperature: -40 to 70 degree.

Operating Humidity: Up to 95% relative humidity.

Material: Cast Aluminum

Installation steps:
Step 1: Remove the power supply of the wireless AP/Router
Step 2: Remove the antenna of the wireless AP/Router
Step 3: Use the standard RG316 feeder to connect the bidirectional amplifier RFIN and the antenna of the wireless ? ? ? ? ? ? ? ? ?AP/Router
Step 4: Rotate the antenna to the RFOUT port of the bidirectional amplifier
Step 5: Power the bidirectional amplifier first, then power the wireless AP/Router
Package included:
1 x WiFi Amplifier
1 x Connector cable
1 x Power supply（Some models not）
1 x Manual



Note: Please use within the input power range, excessive power may burn out the equipment or cause it to malfunction!

AB007 4W 2.4GHz Input Trigger Power:Min: 3dBm Max: 20dBm

AB003 8W 2.4GHz Input Trigger Power:Min: 3dBm Max: 30dBm

AB018 4W 2.4GHz 50XPower ?Input Trigger Power:Min: 3dBm Max: 23dBm

Shipping and Returns:

Shipping is available from China and Russia

Warranty:

Products ordered from China come with a 75-day money-back guarantee.