Electric bicycle lithium electric bicycle LCD instrument display switch 66 Smart display 36 volts 48 volts

LCD Display

Model ；66

Voltage :24V /36V/48V/60V (Set By P03)

Material :ABS/Acrylic

Colour :Black

Communication Protocol :UART

Holder Diameter :22.2mm

Display Type :Segment

Plug Type :SM plug or Waterproof cable

Grade of waterproof :IP65

Note: Due to product upgrade, the product you purchased may be slightly different from the descriptions in this user manual, and this won’t affect normal usage.

Set Data

P01:Backlight Brightne (1: darkest; 3: brightest)

P02: Mileage Unit (0: KM; 1: MILE)

P03: Voltage Cla: 24V/36V/48V/60V (default) /36V

P04: Hibernation Time (0: never, other figures refer to the hibernation time) Unit: minute

P05: Aistance: 0,3 gear 1gear2V, 2gear3V,3gear 4V

1,5 gear 1gear 2V,2gear 2.5V,3gear 3V,4gear 3.5V,4gear 4V

P06: Wheel Diameter Unit: inch Precision: 0.5

P07: steel Number (1-100)

P08: Maximum Speed Limit Unit: KM/H

P08: Speed limit: range 0-50 km/h, 50 means unlimited speed.

1. Non-communication state (instrument control): Turn off the PWM output when the speed i

greater than the setting speed; turn on the PWM output automatically when the speed is lower than

the setting speed, and the driving speed is (+1km/h) at the current speed; (Turn off the speed limit

only for the booster.

2. Communication state (controller control): drive speed is maintained at a set value.

Error: +1km/h; (Average speed limit of booster and turner)

Note: The value here is based on kilometers. When the unit setting is changed from kilometers to

miles, the speed value of the display interface will automatically be converted to the correct value of

miles. However, the speed limit data set at the menu under the mile interface will not be converted,

which is inconsistent with the actual speed limit value of miles.

P9: Zero Start, Non-Zero Start Settings, 0:Zero Start; 1:Non-Zero Start

P10: Driving mode is set to 0: boost drive (through boost gear to determine how much power to

output, at this time the switch is invalid).

1: Electric drive (by turning the driver, the boost gear is invalid at this time).

2: