IGBT Voltage Capability Transistor Tester Diode MOS Triode L

Detailed Information About The Product:

Product selling points and features: 1. The output voltage is 110-2600V DC. You can turn the voltage adjustment b utton clockwise to increase the voltage and counterclockwise to decrease the voltage.The output current is 0.25~3.4mAh. You can turn the voltage adjustment b utton clockwise to increase the current and counterclockwise to decrease the current.
2. Widely used: This tool can be widely used for MOS transistor IGBT diode Zener diode diode bridge maximum voltage capacity testing voltage verification of capacitors and varistors LED backlight and lamp board testing etc
3. When testing MOS transistors transistors and Zener diodes it is recommended to adjust the current to the minimum scale of 0.25mA. When testing the LED backlight board it is recommended to adjust the current to the maximum scale of 3.4mAh.
4. Portable size: The small size of this tool is very convenient for daily use. You can carry it in a tool bag without occupying too much storage space.
5. Equipped with a built-in 660mAh high capacity lithium battery for pow er supply it can be charged in a timely manner through the Type-C interface.

Product parameters:
Battery capacity: 3.7V 600mAH
Charging port: TYPE-C
Input: 5V 1A
Charging current: Max.550mA
Output voltage: 120-2700V
Output current: 0.2-3.8mA
Applicable components: MOS tube/IGBT/triode/diode/Electrolytic capacitor/LED/MOV/unidirectional thyristor/rectifier bridge
Test objective: Breakdown voltage value of electronic components
pow er supply: built-in lithium battery 500mah
Attention:
1. Do not use it to test 450V/220UF and other high-voltage large Electrolytic capacitor. It is possible to test low-voltage capacitors such as 2200UF/35V.
2. If there is no output voltage when pressing the red high-voltage start b utton it is likely that the lithium battery voltage is lower than 3.1V and the tester cannot be pow ered on. It needs to be charged in a timely manner.
3. Only when testing LEDs and voltage regulator diodes can the output current be adjusted to the maximum value. For testing other components the output current can be adjusted to the minimum value to avoid damaging the components
Standard: Red
Material: plastic
colour: as described

Package Contents:
1 x Transistor Tester

Only the above package content other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best pricewe support Wholesale/Drop Shipping Order
1. For Drop Shipping order please remark"dropshipping order" we will prioritize it.
2. For Wholesale/Drop Shipping orders if you have any ideas about the price or packageplease contact us in advancewe will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the orderplease contact us in advance we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your packageplease don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !