KuWFi Outdoor CPE Bridge 2.4G Outdoor Wi-Fi Access Point Wifi Signal Extend Point To Point AP & Repeater Mode IP65 24V POE

Tips:

1.PTP/PTMP up to 1KM distance (we test it).

The transmission distance is affected by many factors, such as local network conditions, buildings, trees, etc.，maybe it cannot reach 1KM,but please understand.if you want to reach long distance wifi coverage,we suggest that you buy 2pcs ,thanks!

2.WAN connects to PoE, LAN connects to other devices

Description：

CPE130 is an economic 300Mbps outdoor CPE with LED display to configure the WDS PT/PTMP connection. It comply with IEEE 802.11b/g/n standard, with 8dBi dual polarized high gain antenna, the PTP/PTMP distance Up to 1000 meters.

It support Wireless AP, Wireless Bridge operation mode for PTP/PTMP connections, with LED display, easy to setup bridge operation mode, IP address, Channel by Function/Selection switch together with LED display, no need to access into GUI, avoid the complex setup program, and simple to view the connection status and signal strength by LED display, save much human work and cost, make the long range wireless coverage, data transmit and wireless monitoring simple and professional.




1.300Mbps 2.4Ghz Outdoor CPE Bridge

The CPE Bridge 2.4GHz Wi-fi network maximum rate of 300Mbps.Two RJ45 100Mbps network ports(WAN/POE and LAN Port).




2.AP Mode and Repeater mode

The Wi-Fi Bridge supports universal AP mode and Repeater mode, with a wider range of user application scenarios.




3.Built in 8dBi antenna

Built-in 8dBi Panel antenna, PTP/PTMP connect distance up to 1KM, very suitable for outdoor wi-fi camera monitoring.




4.Support One-click pairing

Through the buttons on the bridge, the two Bridges can be pairing with one click, eliminating the tedious pairing process.Realize point-to-point connection.One Master Bridge can be paired with multiple Slave Bridges.




5.Support 24V POE Power Supply

The CPE Bridge supports 24V PoE power supplyhe power supply mode of POE solves the problem that the network bridge can be placed remotely through the network cable.




6.IP65 Outdoor Waterproof & 4KV Lightning Proof

Adopt outdoor ABS plastic shell, simple and elegant.Support professional 4KV lightning protection, IP65 water-proof, dust-proof, suit for multiple harsh environments.

Specification:

Chipset: MT7628DAN
Memory: 64MB RAM
Flash: 8MB
Wireless: 802.11b/g/n, 2.4GHz to 2.484GHz
Data Rate: 300Mbps
WAN/POE Port: 1*10/100Mbps
LAN Port: 1*10/100Mbps
Antenna: 8dBi Panel Antenna,V: 60°,L: 33°
Outdoor Waterproof Level: IP65
Size: 168mm*88mm*57.6mm
Power: POE 24V/0.5A
Working Temperature: -30°C ~ 55°C
Storage Temperature: -40°C ~ 70°C
Humidity: 5%~95% (typical)

Packing list:

2pcs CPE Bridge
2pcs Ethernet Cable
2pcs POE Power Supply
1pc Quick Start Guide

Applications Case

I was looking for a wireless bridge to bring internet connection to my backhouse about 500 meter from the main house, which is too far for wifi range and too long to run the ethernet cable. I connected the adapter to the bridge using the ethernet cable on one end and the other end of the ethernet cable to the main house internet hub. I connected the other adapter to the other bridge using another ethernet cable for the backhouse. I like that the bridges can go very far, up to almost a mile without obstruction, which is ample for my need.