M.2 WiFi Port A Key Wireless NIC Extension Cable Conversion Board Extends The NGFF To Stabilize The ADT At Full Speed

?


This product is for engineering personnel only, does not support external laptop graphics card, do not buy.

ADT factory direct sales, excellent product performance, excellent reputation products, 100% full inspection power test delivery.

Company brand: ADT (Erdat) Electronics

Product model: R55SF

Product name: M.2 WIFI Interface (A.EY) adapter extension cable

Wire length: 3~100cm (support line length customization)

Speed bandwidth: PCIe3.0x1 gen3 8G/bps

Adaptation range: Extension of the M.2 A key wireless NIC interface on the motherboard (USB Bluetooth is not supported)

Purchase restrictions: Only for professional engineers to specify the purchase, not suitable for ordinary use can not be used, ordinary buyers do not buy.

Purchasing tips: Be sure to buy 1 or 2 samples first to test and verify that they are correct and then purchase in bulk.

Friendly tips: This product is compatible with many problems, incorrect assembly or improper operation will burn your equipment. Limited to professional engineers. This product is non-refundable and non-exchangeable. Please consider and confirm before placing an order.

Wire length and hole distance description:

The length of the wire in our store refers to the part of the visual wire, excluding PCB and connector. Refer to the size mark of standard R55SF-5cm(5cm) blue in the following figure.




Screw hole distance refer to the green arrow size mark, line length will have a certain error, do not shoot if you mind, the specific error situation refer to the following figure:


Product model description:




Model
Instructions


R55SF
M.2 WiFi to M.2 WiFi A key Extension cable


?
?







Product advantages:

one Wire advantages, the use of German patent imported wire, the use of Taiwan imported Lotes connector, high frequency support PCIe 3.0 8G/bps stable transfer

two Line length advantage, from 1 cm to 10 meters can be accepted to order, the conversion wire sold in our store, the wire impedance is low, the line length within 60 cm can stably support PCIe3.0 full speed,

Three. The differential signal has no through hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit phenomenon, the product is durable

Four. PCB selection of high frequency and low resistance of high-quality materials, PCB workmanship precision, PCB use of high TG plate, copper thickness thickening to 1oz, gold finger gold-plated content, gold-plated foot conductive performance is good, can reduce the oxidation rust resistance caused by the rise of blue screen of death.

Five. Product selection of wire itself is very durable, the use of 3mm thickness of the PCB gasket protection at the metal welding point, and lock the screw and hex nut fastening, the product is strong and reliable tensile resistance, anti-interference, there will be no broken wire nail problems.

Product picture:










Summary of technical issues:

What is the thickness of the wire? Is it soft?

The wire thickness of this product is 1.4mm, so the wire of this product is harder.


What is the quality of the wire? Is there a shield?

Using EMI shielding conductive polymers, new materials for EMI shielding, flat cable design. This technique allows each cable to be completely covered by an electromagnetic interference shield of conductive polymer to prevent incoming or outgoing emission of electromagnetic frequencies, minimize interference and performance degradation, and reduce the weight of the extender.



Purchase note:


1. When inserting the cable, be sure to recognize the direction, do not insert it backwards or out of position, to prevent burning the device. When inserting the cable, hold the socket of the device before inserting the cable, and avoid inserting the socket pin with excessive force.

2. All kinds of motherboards and equipment signal driving ability and other conditions are not the same, the results of the test shop is not guaranteed to be consistent with your test results, as long as it is connected to the extension cable, the signal will have loss, requesters, do not buy

3. All products in our store are shipped by 100% electrification test, and the gold finger will have traces of plugging and removing during the test. Buyers can not ask for a return or exchange for this reason, and those who ask, do not buy

4. Do not buy if you do not have DIY ability and cannot install yourself

6. As long as it is a conversion cable, there is a compatibility problem, please confirm the compatibility of your equipment and the motherboard system, can not be determined, do not buy.

7. This product only supports M.2 WiFi interface (A.EY), please confirm whether your motherboard is M.2 WiFi interface, if you cannot confirm, do not buy.

8. It is known that laptops of HP and Lenovo have BIOS whitelist compatibility problems, which may cause your network card to be unavailable. Please confirm the compatibility of your laptop and your network card. If you are not sure, do not buy it.

9. This product has many compatibility problems, only engineering professionals to purchase, other non-engineering professionals do not buy.

10. The graphics card or motherboard is an electronic device that will age and oxidized with time, and then connect the extension cable will only be more unstable. Older devices are not supported. Equipment more than 3 years old. Do not buy.





?



window.adminAccountId=2674347269;





?width=1287&height=902&hash=2189








?width=1600&height=800&hash=2400


?width=1600&height=800&hash=2400


?width=800&height=800&hash=1600


?width=800&height=800&hash=1600


?width=702&height=383&hash=1085


?width=1200&height=755&hash=1955