Pocket Hotspot Portable 4G Wireless Router MIFI 3200mAh Mobile Broadband 150Mbps Wide Coverage with SIM Card Slot 10 WiFi Users

*The battery would be gone during transportation ,Pls use 5V1A charge to charge 3 hours before use. and pls take off insulating film from battery metal pins .Otherwise it might not work .
*the device is free of charge. You need to prepare a SIM card that can access the Internet and insert it into the device to use it.

Feature:
1. Share with Multiple Users: This router supports up to 10 users, making it suitable for small groups or families who want to share the internet connection without sacrificing speed or performance.
2. Long Battery Life: Equipped with a high-capacity 3200mAh lithium battery, this router offers over 30 hours of standby time and 4-6 hours of continuous working time, allowing you to stay connected for extended periods without worrying about running out of power.


Specification:
Download: 150Mbps, upload: 50Mbps
Wireless internet support: 802.11 b/g/n
Sharing: Supports up to 10 users
Battery: 3200 mAh lithium battery
Standby time: The standby time exceeds 30 hours, and the continuous working time exceeds 4-6 hours
Antenna: built-in
Input voltage: 100V~240V, 50Hz~60Hz
Output voltage: Output: 5V DC ± 10%
Output current: 1.0A
Working temperature: -10 ° C to 60 ° C
Working humidity: 5% -65%
Storage temperature: -30 ° C to 80 ° C
Storage humidity: 5% to 95%
Size: 100 * 62 * 17mm/3.94 * 2.44 * 0.67in
Weight: 103g
Packaging size: 121 * 72 * 36mm/4.76 * 2.83 * 1.42in
Weight: 136g

 

Troubleshooting for failure to boot:

1.The battery insulation strip has not been removed.

2.Fully charge the battery.

3.You need to press and hold the power button to turn it on.

Troubleshooting for no network:

1.Check whether the SIM card is inserted correctly:The correct way to insert the SIM card is with the chip facing down. One end of the sim card is completely straight, while the other end has a slanted corner. Insert the card into the slot using the straight end.

2.If there is no problem with the card insertion, you need to wait a little longer for 1 minute for the first use because it needs to register the network, so it will be a little slower, and then it will be very fast in 30 seconds

3.Add APN：Some SIM card operators set specific network configurations,you need to manually add APN. The APN information needs to be obtained from the card vendor. To add APN: (1) Put a SIM card into the device and turn it on; (2) Connect your phone or computer to the device's WIFI; (3) Open the IP address, log in to the backend, find the APN setting, click: Add, add the APN of this SIM card as required, and save it.

4.You can try to change the SIM card to see if it is a SIM card problem, or try to use it in another place to see if the signal is poor at the current location.