Programmer Adapter Power Box For KTM FLASH V1.95

Detailed Information About The Product:

USB:Designed for connecting to the computer. It is to be connected when the built-in USB - UART converter is enabled;
DC:Designed for powering the built-in circuit as well as the connected ECU. It is recommended to use only quality units with 12V output voltage. While reading the pas when it is impossible in the vehicle one must note that high-voltage converters in ECUs consume rather high current at the start which can trigger protection mechanism or even result in the power unit damage;
J2534 OBD-II-F:Designed for connecting the same name interface to OBD-II;
DB-15:Designed for connecting to the main ECU connector. It is recommended to use 14P600KT02 14P600KT03 cables or analogous ones;
IDC-26:Designed for connecting directly to the ECU board or via the adapter to the special head. It is recommended to use 14P600KT06 cable or an analogous one for Tricore GPT.It is recommended to use F-l-a-s-h Development Toolkit software for f-l-a-s-hing for Renesas CPUs.

POWER:
Power control. The tool has three modes of power supply to the ECU: OFF allows to remove all power and control signals from IDC-26 and DB-15 connectors; MANUAL supplies power to VECU and VKEY terminals and to the control outputs depending on the chosen tactics; AUTO automatic control in this mode power is controlled by the loading program with L-Line signal 15 pin OBD-II.
BOOT:
Simultaneous control of BOOT RESET and CNF1 signals 3.3V: OFF allows to remove all control signals from DB-15 connector; MANUAL pulls RESET and BOOT to the signal minus and CNF1 to +3.3V; AUTO automatic control in this mode BOOT RESET and CNF1 signals are simultaneously controlled by the loading program 12 pin OBD-II OEM12.
Colour:White
Material:plastic

Package Contents:
1 set of power box

Only the above package content other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best pricewe support Wholesale/Drop Shipping Order
1. For Drop Shipping order please remark"dropshipping order" we will prioritize it.
2. For Wholesale/Drop Shipping orders if you have any ideas about the price or packageplease contact us in advancewe will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the orderplease contact us in advance we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your packageplease don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !