RISC/Milk-V Duo Development Board+2MP for IoT Enthusiasts D

Detailed Information About The Product:

[Product Introduction] Milk-V Duo is an MPU developed based on CVITEK CV1800B chip that can run FOR LINUX and RTOS. Milk-V Duo provides professionals, IoT enthusiasts, hobbyists, DIYers a reliable, low-cost and extremely capable platform for building and tinkering with their ideas, helping them become Reality.
processor: 1GHz and 70OMHZ RISC-V C906 processor.Integrate CVITEK TPU to realize intelligent detection.Support H.264/H.265 video encoding, up to 2880x1620@20fps.Compatible with HD CMOS sensors.Programmable frequency output for sensor clock. Comprehensive ISP features for image optimization.Some OpenCV libraries support CV hardware acceleration.16-bit audio codec with built-in microphone input and output.Flexible network configuration with 1 Ethernet PHY
Product parameters: Processor: CVITEK CV1800B (906@1GHz; 906@700MHz); Memory: DDR2 64MB; Storage: 1 Mirco-SD slot, 1 SD NAND pad; USB: 1 Type-C for data and power, 1 USB2 pad; Camera: 1 16P FPC socket (MIPI CSI 2 channels); GPIO: 26 pins available for general purpose I/O (GPIO)
GPIOs: Up to 26 GPIO pins on the MilkV Duo 40-pin header to access internal peripherals such as SDIO, I2C, PWM, SPI, J-TAG, and UART.Up to 3xI2C / 5xUART / 1xSDIO1 / 1xSPI / 2xADC / 7xPWM / 1xRUN / 1xJTAG
USB interface: Compatible with USB 2.0, backward compatible with USB 1.1.Support for various speed modes, host/device capabilities and transports.note: Please note that due to different batches, there may be differences in the appearance, color, and printing of the product, which will not affect its use

CSI-2 (MIPI Serial Camera):
With 16-pin FPC interface for 2-wire MIPI camera input
Operate l2C, CLK and RST signals at 1.8V voltage level
Ethernet:
Milk-V Duo includes CV1800B chip and 100Mbps physical layer
PHY connected to 5-pin pad
Ethernet use requires external transformer and RJ45 socket
CSI-2 (MIPl Serial Camera):
With 16-pin FPC interface for 2-wire MIPI camera input
Operate l2C, CLK and RST signals at 1.8V voltage level
protocol:
Scalable interface via USB hub (up to 127 devices)
Power saving mode, support HID devices
USB with configurable software
USB Type-C for accessing storage media
Micro-SD:
SDIO 0 is compatible with the Secure Digital Storage (SD3.0) protocol
Board Specifications:
Single-sided PCB
Type-C port located on the top edge
Dual Slotted/Through Hole Headers Around Remaining Edge
Available as surface mount modules or in dual in-line package (DIP) format
40 primary user pins on 2.54mm (0.1IN) pitch grid with 1mm holes
Compatible with FOR veroboard and breadboard
Development Board size: 21mm x 51mm
Material: PCB
colour: random color

Package Contents:
1 x Development Board(randomly colored. Cannot be chosen the specific color.)
1 x 2MP CAM GC2083
1 x STC Downloader Cable(CH340G USB to serial UART TTL)

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.