1. Adopting the FT232RNL+SP485EEN chip scheme, high-speed communication is stable, and compatible
2. On-board (transient voltage suppression tube) can effectively suppress the surge voltage and transient voltage in the circuit, and prevent- and static electricity
3. The on-board self- fuse and protection diode can the stable output of current and voltage, prevent over-current and over-voltage, and the impact resistance
4. Onboard 15KV ESD isolation protection and 600W -surge protection. 120R terminal resistance of on-board RS485/RS422 interface, enabled by default, can be modified through jumper cap setting
Product type: industrial isolated USB to RS485/422 converter; Communication rate: FT232RNL 300bps~3Mbps; interface: USB; Equipment interface: RS485/422
USB interface:
Working level: 5V
Interface type: USB-B interface
Interface protection: 200mA self- fuse, ESD static protection
Transmission distance: about 5
RS485/422 interface:
Interface type: terminal block
Interface pins: A+, B -, PE
Direction control: the hardware automatically determines and controls the data transmission direction
Interface protection: 600W -protection, surge and 15KV static electricity protection (onboard 120R balance resistance)
Transmission distance: about 1200 (at low speed)
Transmission mode: point-to-many, (up to 32 nodes, and repeaters are recommended for more than 16 nodes)
indicator light:
PWR: power indicator, connected to USB, red light when voltage is detected
TXD: send indicator light, green light when data is sent from USB port
RXD: receiving indicator light, blue light when data is sent back from the device interface
Use environment:
Temperature range: -15 ℃~70 ℃
Humidity range: 5% RH~95% RH
: , Linux, Android, WinCE, /8.1/8/7/XP
Housing: guide-type ABS environment-friendly housing, suitable for 35mm DIN rail
Size: 81.9 x 54 x 32mm
color:Black
Material:ABS+metal
Package Contents:
1 x USB TO RS485/422 converter
1 x USB cable type A male to type B male, about 1.2m
1 x screwdriver
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.